| 7018ACD/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Oil Speed Rating n2:13000 rpm; Basic Dynamic Radial Load Rating C:19500 N; Accessories:One Shield; Basic Static Radial Load Rating Co:11200 N; Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating Open/Shielded n1:10000 rpm; d:30.000 mm; Sealed Speed Rating n3:7500 rpm; D:62.0000 mm; Fillet Radius ra:1.00 mm; B:16.00 mm; Grease Speed Rating n1:10000 rpm; |
| 7010ACD/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Housing:SAW 518; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm; ba:47.625 mm; H1:101.6 mm; A1:98.425 mm; J max.:295.275 mm; Bearing limiting speed:3800 r/min; J min.:263.525 mm; Mass pillow block:23.1 kg; Initial grease fill:141.75 g; Cap bolt, SAE grade:5; PG:1/8 NPT; H2:47.625 mm; R2:27.781 mm; Stabilizing ring:SR-18-15; Cap bolt recommended tightening torque:203.4 N·m; H:192.484 mm; |
| 7014CE/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Basic Static Radial Load Rating Co:19000 N; d:35.000 mm; Grease Speed Rating n1:8500 rpm; Basic Dynamic Radial Load Rating C:33200 N; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Oil Speed Rating n2:10000 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; D:80.0000 mm; B:21.00 mm; Sealed Speed Rating n3:6000 rpm; Accessories:Two Shields; |
| 7011CE/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Recommended tightening torque for grub screw:4 N·m; d:25.4 mm; r1,2 min.:0.6 mm; Mass complete bearing:0.19 kg; s1:19.8 mm; Fatigue load limit Pu:0.335 kN; Hexagonal key size for grub screw N:3.175 mm; B:34.1 mm; Calculation factor f0:14; d1 ≈:33.74 mm; Basic dynamic load rating C:14 kN; Basic static load rating C0:7.8 kN; C:15 mm; B4:5 mm; D:52 mm; Thread grub screw G2:1/4-28 UNF; Limiting speed1):4300 r/min; |
| 7018ACDGC/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | G1:50 mm; Hydraulic nut:HMV 142 E; d:670 mm; G2:G 1/4; G:Tr 710x7; B2:294 mm; d1:630 mm; Mass withdrawal sleeve:125 kg; B1:280 mm; A:12 mm; |
| 7013ACE/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | d1:245 mm; dynamic Cr:566.040 kN; Oil:840 min-1; D1:123 mm; Pu:53.140 kN; H:102 mm; d:120 mm; static Cor:1590.000 kN; D:250 mm; Grease:630 min-1; rs (min):4 mm; |
| 7013ACD/P4AQBCC SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | D:150.0000 mm; Oil Speed Rating n2:4800 rpm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; B:28.00 mm; Basic Static Radial Load Rating Co:83000 N; Basic Dynamic Radial Load Rating C:95600 N; d:85.000 mm; Grease Speed Rating n1:3600 rpm; |
| 7020CD/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Pa:27.4 kN; P90°:111 kN; P150°:66.7 kN; Da:215.001 mm; H1:133.35 mm; Max. speed for Taconite seal:725 r/min; R1:77.787 mm; Mass pillow block:49.9 kg; Cap bolt, SAE grade:5; P60°:185 kN; Cap bolt recommended tightening torque:400 N·m; P180°:81.4 kN; A2:254 mm; Cap bolt:2 x 1-8 UNC; H2:53.975 mm; ba:61.913 mm; J1:69.85 mm; Appropriate attachment bolt size G:0.75 in; h:46.831 mm; |
| 7014CD/P4ADGC SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | B3:20 mm; d2:498 mm; Associated eyebolt for handling:M 10; d1:535 mm; Associated spanner:TMFN 80-500; b:36 mm; Mass lock nut:45.5 kg; G:Tr 460x5; B5:95 mm; h:20 mm; B:75 mm; d3:580 mm; |
| 7016ACD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Reference speed:430 r/min; Basic static load rating C0:5500 kN; D:1090 mm; da min.:1053 mm; d1 ≈:1086.5 mm; Fatigue load limit Pu:63 kN; Minimum load factor A:160; Limiting speed:600 r/min; r1,2 min.:2.1 mm; ra max.:2 mm; Da max.:1037 mm; D1 ≈:1003.5 mm; H:70 mm; Mass bearing (including seat washer where applicable):68.5 kg; d:1000 mm; Basic dynamic load rating C:572 kN; |