| 7026ACD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | D:560 mm; Pu:2410 kN; rs (min):5 mm; with tapered bore:500 min-1; with cylindrical bore:420 min-1; B:135 mm; Oil:358.020 kN; Static (Cor):22.3 mm; d:380 mm; Dynamic (Cr):12 mm; Grease:4700 kN; |
| 7011ACD/P4ATBTB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | r1,2 min.:1.5 mm; da min.:108 mm; d1 ≈:116 mm; K:3.5 mm; s max.:4 mm; Mass bearing:3.94 kg; rb max.:1 mm; Limiting speed:2600 r/min; ra max.:1.5 mm; Basic dynamic load rating C:391 kN; r3,4 min.:1 mm; D1 ≈:133.5 mm; d:100 mm; Calculation factor kr:0.5; Fatigue load limit Pu:75 kN; Basic static load rating C0:620 kN; Da max.:143 mm; Reference speed:2000 r/min; B:67 mm; b1:6 mm; |
| 7015CD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | RG:3/8 NPT; P120°:66.7 kN; A1:120.65 mm; Cap bolt recommended tightening torque:298.3 N·m; Eye bolt:2 x 3/8-16 UNC; J min.:320.675 mm; ba:50.006 mm; J max.:368.3 mm; Stabilizing ring:SR-22-19; P90°:107 kN; PG:1/4 NPT; H:239.316 mm; Cap bolt:5/8-11 UNC; Pa:17.3 kN; Initial grease fill:232.47 g; Cap bolt, SAE grade:8; Da:200 mm; End plug (suffix Y):EPR 13; Ca:62.89 mm; Appropriate attachment bolt size G:0.75 in; |
| 7020ACDGC/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; Mass bushing:0.01 kg; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; D1:20 mm; D:16 mm; B1:3 mm; Coefficient of friction µ min.:0.08; Tolerance housing:H7; Tolerance shaft:e7; B:8 mm; d:10 mm; |
| 7021ACD/P4ATBTB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Calculation factor kr:0.1; rb max.:1 mm; Mass bearing:1.22 kg; D1 ≈:122 mm; r3,4 min.:1.1 mm; da max.:101 mm; ra max.:1.5 mm; da min.:96 mm; Fatigue load limit Pu:12.7 kN; r1,2 min.:1.5 mm; B:24 mm; Da max.:133 mm; Limiting speed:7000 r/min; db min.:106 mm; Basic static load rating C0:104 kN; s max.:3.5 mm; F:103 mm; Basic dynamic load rating C:80.9 kN; Reference speed:6300 r/min; d:90 mm; |
| 7015CD/P4ADBC SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Da max.:582 mm; da max.:446 mm; Axial load factor Y:0.6; Basic static load rating C0:2320 kN; Basic dynamic load rating C:1380 kN; ra max.:4 mm; Mass bearing:90 kg; da min.:418 mm; B:90 mm; Calculation factor kr:0.15; s max.:14 mm; F:450 mm; D1 ≈:527 mm; Reference speed:1100 r/min; Limiting value e:0.2; Fatigue load limit Pu:196 kN; D:600 mm; Limiting speed:1500 r/min; db min.:455 mm; r1,2 min.:5 mm; |
| 7015CE/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Pu:1.781 kN; Grease:4 200 min-1; Da:145 max; Static (Cor):43.800 kN; Bearing designation:16020 ; Weight:0.91 kg; da:105 min; rs:1 mm; D:150 mm; Oil:5 000 min-1; d:100 mm; Dynamic (Cr):44.000 kN; B:16 mm; ra:1 max; |
| 7022ACD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | B:63 mm; d:85 mm; Mass inner ring:1.05 kg; F:100 mm; r, r1,2 min.:1.1 mm; |
| 7028CD/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Basic dynamic load rating C:222 kN; T:53.5 mm; r3,4 min.:1.5 mm; da max.:64 mm; Da max.:92 mm; Mass bearing pair:1.73 kg; Basic static load rating C0:260 kN; Ca min.:4 mm; rc max.:0.6 mm; r5 min.:0.6 mm; Calculation factor Y0:1.6; ra max.:1.5 mm; K:3 mm; 2B:50 mm; Fatigue load limit Pu:30 kN; Calculation factor Y2:2.5; b:7 mm; d:55 mm; D:100 mm; Reference speed:4300 r/min; |
| 7018CE/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Coefficient of friction µ max.:0.15; h:76.5 mm; D:90 mm; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; B:70 mm; a:3.5 mm; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; d:75 mm; Tolerance housing:H7; Coefficient of friction µ min.:0.08; α:124 °; Mass bushing:1.19 kg; |