| 7011CD/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Misalignment factor k1:0.113; B:69 mm; s2 max.:4.6 mm; B2 ≈:93 mm; D:200 mm; G1:14 mm; d1:125 mm; Limiting speed:850 r/min; s1 max.:11.4 mm; B1:83 mm; Mass bearing + sleeve:8.9 kg; da max.:167 mm; Fatigue load limit Pu:112 kN; ra max.:2 mm; r1,2 min.:2 mm; da min.:134.6 mm; Basic dynamic load rating C:720 kN; d2 ≈:149 mm; Operating clearance factor k2:0.097; Da max.:190 mm; |
| 7011CE/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | ZZ:0.06 in; Basic Dynamic Radial Load Rating:3150 lbf; Diameter D3:1.328 in; Bore Diameter D:1 in; TP:0.02 in; ANGLE:135 º; D11:1.328 in; D_SEL:1/4-28; Inner Width B:1.343 in; Outher Width C:0.5906 in; Weight W:0.37 lb; Dimension S:0.563 in; Outside Diameter D2:2.0472 in; Basic Static Radial Load Rating Co:1750 lbf; |
| 7016CDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | r2s (min):0.3 mm; Dynamic (Ca):43 kN; D:62 mm; B:18 mm; a:15 mm; C:14 mm; T:18 mm; Static (Coa):53.1 kN; rs (min):1 mm; Pu:6.480 kN; d2:35 mm; r1s (min):1 mm; |
| 7016CEGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Mass inner ring:0.021 kg; r, r1,2 min.:0.3 mm; F:24 mm; B:20 mm; d:20 mm; |
| 7034CD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Oil Speed Rating n2:4800 rpm; Basic Static Radial Load Rating Co:106000 N; Grease Speed Rating n1:3600 rpm; B:38.10 mm; Accessories:Two Shields; Fillet Radius ra:1.50 mm; d:65.000 mm; D:120.0000 mm; Sealed Speed Rating n3:3600 rpm; Basic Dynamic Radial Load Rating C:88000 N; |
| 7014ACD/P4ADBB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | RG:3/4 NPT; R1:104.775 mm; H2:66.675 mm; h:52.388 mm; J min.:441.325 mm; End plug (suffix Y):EPR 19; Mass pillow block:94.8 kg; N1:28.575 mm; Appropriate attachment bolt size G:1 in; Max. speed for Taconite seal:460 r/min; A1:158.75 mm; H:336.55 mm; Pa:40 kN; P90°:136 kN; da:161.925 mm; Housing:SAF 036 KA; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; P60°:226 kN; |
| 7009CE/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Comparative radial load rating CF:585 kN; r1,2 min.:3.3 mm; Basic dynamic load rating C:2393 kN; Calculation factor Y0:1.6; d:330.2 mm; a:184 mm; Basic static load rating C0:5000 kN; D:482.6 mm; Fatigue load limit Pu:415 kN; C:127 mm; d1 ≈:401 mm; T:177.8 mm; Thrust factor K:1.49; Calculation factor Y1:1.7; Calculation factor e:0.4; r3,4 min.:1.5 mm; Comparative axial load rating CFa:225 kN; |
| 7015ACD/P4ADBB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,25 Degree Contact Angle | Lubricant:Regular relubricatio; C:47.625 mm; dk:91.186 mm; da max.:72.3 mm; b:9 mm; M:6.5 mm; Mass plain bearing:1.85 kg; Da max.:94.7 mm; B:55.55 mm; Design (sliding contact surface combination):Steel/steel; r2 min.:1 mm; Specific dynamic load factor K:100 N/mm²; da min.:68.3 mm; r1 min.:0.6 mm; b1:8 mm; Basic dynamic load rating C:345 kN; d:63.5 mm; α:6 °; Basic static load rating C0:1040 kN; |
| 7011CE/HCP4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | D:32.0000 mm; D2R:30.2 mm; B:15.9 mm; Basic Static Radial Load Rating Co:5600 N; Sealed Speed Rating n3:15000 rpm; d:12.000 mm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:20000 rpm; Grease Speed Rating n1:15000 rpm; Basic Dynamic Radial Load Rating C:10400 N; |
| 7013CDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | Mass bushing:1.35 kg; h:66.5 mm; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; D:80 mm; B:90 mm; Tolerance shaft:e7; a:4.5 mm; Specific static load factor K0:45 N/mm²; α:124 °; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; d:65 mm; |