| No. | Brand | D | u | r | c | o | n | B | e |
| 6034 | Nachi | - | - | - | - | - | - | - | - |
| 20kg | - | - | - | - | - | - | - | - | - |
| P2 | - | 130 mm | - | - | - | - | - | - | - |
| MJ45A/Automatic | - | - | - | - | - | - | - | 14 mm | - |
| 18mm | - | - | - | - | - | - | - | 82.550 mm | - |
| 2 | - | 64 mm | - | - | - | - | - | 37 mm | - |
| 7205E | - | - | - | - | - | - | - | - | - |
| 1-10pcs | - | 240 mm | - | - | - | - | - | - | - |
| 2003-2008 | NSK | 279,5 mm | - | - | - | - | - | 76 mm | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| 5 | - | 47,000 mm | - | - | - | - | - | 12,000 mm | - |
| 90% | - | - | - | - | - | - | - | - | - |
| KBO16 | INA | - | - | - | - | - | - | - | - |
| 4626 | - | - | - | - | - | - | - | 76.203 mm | - |
| 4pcs | - | - | - | - | - | - | - | 79,38 mm | - |
| 17x7.5 | - | - | - | - | - | - | - | - | - |
| PC400-7 | - | 39 mm | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | 70 mm | - |
| 10pcs | - | 125,000 mm | - | - | - | - | - | - | - |
| 309SFFC | TRW | - | - | - | - | - | - | - | - |
| 3 | FAFNIR | 180 mm | - | - | - | - | - | 42 mm | - |
| al41635 | INA | - | - | - | - | - | - | 75 mm | - |
| 1998-2019 | - | - | - | - | - | - | - | - | - |
| 6006Z, | NTN | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| Ts400 | - | 62 mm | - | - | - | - | - | - | - |
| 5312M Double Row Angular Contact Ball Bearing 60x130x54mm | da min.:433 mm; ra max.:3 mm; KBRG:6104; ALPHA_:0; C_conv:335000; Width (mm):65; SRI:21.36; SBRG:19; SRIN:-0.08; r:4; |
| 5308W Double-row Angular Contact Ball Bearing 40x90x36.53mm | B:23 mm; Nr. of Holes:4; Weight:0.560 kg; Axial Load Factor Y1:1.99; Static Load Rating:81,000 N; D:80 mm; Axial Load Factor Y2:2.96; Axial Load Factor Y0:1.94; Dynamic Load Rating:106,000 N; Groove Width A:6 mm; |
| KB045AR0 Bearings | Basic dynamic load rating (C):103 kN; Shaft(max.):40.000; Bearing No.:K40X55X45H; Oil lub.:12000; P/S:S; Outer Diameter (mm):56; Cr:103; Cu:23.0; Bore Diameter (mm):40; Weight:0.221 Kg; |
| 3209 RS Angular Contact Ball Bearing | Width (mm):24,000; Enclosure Type:Contact Seal; Inventory:0.0; B:24,000 mm; Bore:5.118 Inch | 130 Mil; Weight / LBS:3.403; Size (mm):130x180x24; d:130,000 mm; Manufacturer Item Number:6926LU; |
| CSEB055 Thin Section Bearing 139.7x155.575x7.938mm | Bore Diameter (mm):50.800; d:50.800 mm; T:21.590 mm; a:5.2 mm; r1 min.:3.6 mm; Basic static load rating (C0):84300 kN; B:22.225 mm; Outer Diameter (mm):82.550; Calculation factor (Y0):1.08; (Oil) Lubrication Speed:5200 r/min; |
| QJ1024 Four Point Contact Ball Bearing 120*180*28mm | Outer Diameter (mm):52; Width (mm):34,93; F:33,83 mm; B:34,93 mm; d:22,225 mm; Basic dynamic load rating (C):15,6 kN; L:4 mm; Bearing number:SM1014KB; B2:13,5 mm; D:52 mm; |
| 7019A5TYNSULP2 Angular Contact Ball Bearing 95x145x24mm | (Grease) Lubrication Speed:3400 r/min; Bore Diameter (mm):60; Weight:1,24 Kg; B:46 mm; D:95 mm; Basic static load rating (C0):290 kN; C:46 mm; Brand:CX; Width (mm):46; Basic dynamic load rating (C):189 kN; |
| QJ217-MPA Four Point Contact Bearing 85x150x28mm | F:83 mm; D:45 mm; O:22,9 mm; Brand:NMB; Angle:13 °; H:16,3 mm; d:20 mm; B:20 mm; Bore Diameter (mm):20; L:50 mm; |
| DAC3064WRKB Bearing 30×64×42mm | Factor fo:13.2; Bore:3.15 Inch | 80 Milli; Bore Size:80 mm; Width:39 mm; Width (mm):39; UNSPSC:31171504; B:39 mm; Inch - Metric:Metric; Bore Diameter (mm):80; r min.:2.1 mm; |
| 71913 Angular Contact Ball Bearing 65*95*13mm | D1:13.9 mm; db min.:8 mm; Calculation factor f:1.02; r1,2 - min.:0.3 mm; Calculation factor fHC:1; Preload class A - GA:10 N; Preload class C - GC:50 N; d2:8.7 mm; r3,4 min.:0.15 mm; Calculation factor - f2A:1; |
7324BTN/DT Angular Contact Ball Bearing 120x260x110mm Video
BS 1088 and BS 6566 plywood - Glen-L
So, what is "okoume marine" rated for, if not pleasure craft or small boat construction? ANS: They meet the BS 1088 standard, but are not Lloyds registered. BS
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
BS1088 Marine Ply | YBW Forum
Jun 20, 2007 - Having done a weeks worth of 'research' via the internet I am coming to the conclusion that the British Standard for Marine Ply (BS1088) isn't
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
BS 1088-1:2003 - Marine plywood. Requirements – BSI British
Jul 9, 2003 - Purchase your copy of BS 1088-1:2003 as a PDF download or hard copy directly from the official BSI Shop. All BSI British Standards available