| 3811-B-2RSR-TVH Angular Contact Ball Bearing 55x72x13mm | Bc:39,750 mm; Brand:NTN; Bore Diameter (mm):44,450; Fw:44,450 mm; Bearing number:PK44.4X60.4X39.7; Ew:60,450 mm; Outer Diameter (mm):60,450; |
| 71880C DBL P4 Angular Contact Ball Bearing (400x500x46mm) | Material:Wrapped bronze with; Shaft Dia., Nominal (d):45.0000; ID Chamfer Length (Ci):0.600; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Type:straight; Housing Bore Dia. (Dh) - 50 +0.025 / -0:50 +0.025 / 0; Wall Thickness (S3):2.500; Bearing Bore after Mounting (di) - 45 +0.062 / -0:45 +0.062 / 0; OD Chamfer Length (Co):1.800; Bearing Outside Diameter, Nominal(Do):50.000; |
| 718/850 Angular Contact Ball Bearing 850x1030x82mm | T:22,25 mm; C:18 mm; Size (mm):22x56x22.25; d:22 mm; B:21 mm; D:56 mm; a:14,6 mm; Width (mm):22,25; Brand:ISO; Outer Diameter (mm):56; |
| FAG 7214-B-MP-UA Bearings | Bore Diameter (mm):60,325; C:33 mm; T:38,5 mm; D:140 mm; B:36,513 mm; Width (mm):38,5; Size (mm):60.325x140x38.5; Outer Diameter (mm):140; Brand:NTN; d:60,325 mm; |
| 7209 BECBJ Angular Contact Ball Bearing Size Chart 45 X 85 X 19mm | Bore Diameter (mm):240; (Oil) Lubrication Speed:1200 r/min; Size (mm):240x360x76; (Refer.)Mass(kg):26.8; r min.:4 mm; C0r:1720; (Grease) Lubrication Speed:870 r/min; Calculation factor (Y0):0,72; Y0:0.72; Weight / US pound:57.2; |
| 3311 2RS Angular Contact Ball Bearing | e - ISO Factor8:0.4; Series:940000; Cone Part Number:EE941206D; R - Cone Frontface To Clear Radius1:0.060 in; da - Cone Frontface Backing Diameter:12.95 in; C - Cup Width:2.1250 in; Design Units:Imperial; Cg - Geometry Factor11:0.166; D:19.5000 in; Cage Type:Pin-Type; |
| H71903 High Speed Angular Contact Ball Bearing 17*30*7mm | Attainable speed for grease lubrication:14000 r/min; Calculation factor - f:1.14; Limiting speed for grease lubrication:14000 r/min; Width (mm):20; r1,2 - min.:1.1 mm; Calculation factor f:1.14; Calculation factor f2C:1.08; Basic dynamic load rating - C:26 kN; da - max.:123.8 mm; |
| 3800-2Z BEARING 10x19x7mm | Bearing number:GE750-DW-2RS2; r1s min (mm):3; Bore Diameter (mm):750; r2s min (mm):6; Outer Diameter (mm):1000; Size (mm):750x1000x335; dK (mm):875; Cr (N):65460000; Da min (mm):834; Weight (kg):784; |
| QJ305MPA.C3 Bearing | da min.:197 mm; d1:– mm; Outer Diameter (mm):380; D1:320,8 mm; r min.:4 mm; C:126 mm; da max:225 mm; Weight:71,8 Kg; D:380 mm; Da max.:363 mm; |
| 7228-B-MP-UA Bearing 140x250x42mm | H2:83 mm; G:M6x1; s:21,4 mm; Recommended tightening torque for set screw:11.5 Nm; s1:39.7 mm; P:300 mm; H:233 mm; C:31.85 kN; A5:21.4 mm; Weight:12 Kg; |