| 7602040-TVP Bearing 40x80x18mm | Outer Diameter (mm):9; D:9 mm; d:4 mm; C:2,5 mm; Brand:ZEN; Size (mm):4x9x2.5; Bearing number:684; B:2,5 mm; Basic static load rating (C0):0,227 kN; Basic dynamic load rating (C):0,641 kN; |
| 5313-ZZ Double Row Angular Contact Ball Bearing 65x140x58.7mm | mass:61.3; hidYobi:53434X; SRI:34.3; ra:4; da:269; R:250 mm; d1:335 mm; C0:2480; SREN:0; r min.:5 mm; |
| 7200 Angular Contact Ball Bearing 10x30x9mm | Calculation factor (Y1):3,01; d:160 mm; B:60 mm; (Oil) Lubrication Speed:2400 r/min; Calculation factor (Y0):2,94; Bearing number:23032EK; Outer Diameter (mm):240; Calculation factor (e):0,22; Bore Diameter (mm):160; Brand:NACHI; |
| 708CE/P4A Bearings 8x22x7mm | Brand:AST; Bearing Length, Nominal (B):100.000; Housing Bore Dia. (Dh) - 180 +0.046 / -0:180 +0.046 / 0; OD Chamfer Length (Co):3.000; ID Chamfer Angle (B deg.):15; Bearing Outside Diameter Tolerance (Do tol.):180 +0.040 / +0.015; Bearing Type:straight; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing number:AST650 160180100; Bearing Outside Diameter, Nominal(Do):180.000; |
| 71948C DBL P4 Angular Contact Ball Bearing (240x320x38mm) | Width (mm):30,958; B:30,958 mm; Bearing number:45285/45220-B; T1:11,908 mm; Outer Diameter (mm):104,775; R:2,3 mm; d:50,8 mm; D:104,775 mm; Bore Diameter (mm):50,8; C:23,812 mm; |
| QJ238-N2-MPA Four Point Contact Bearing 190x340x55mm | Bearing number:AST20 8580; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Outside Diameter, Nominal(Do):90.000; ID Chamfer Angle (B deg.):45; Lube Hole Dia. (dl):9.500; Wall Thickness (S3):2.418; Bore Diameter (mm):85; Housing Bore Dia. (Dh) - 90 +0.035 / -0:90 +0.035 / 0; Brand:AST; Shaft Dia., Nominal (d):85.0000; |
| Bearing 4026X2D | Bearing Number:MSE304BR; Dimension R:11.9 in; Note:This product line wa; Support Type:Round Flange; Shaft Size:3.25 in; Dimension V:0.1 in; Dimension P:0.7 in; Dimension L:6.4 in; Cr - Dynamic Load Rating:66768 lbf; Ca - Axial Load Rating:4002 lbf; |
| 7213ACTA Bearing | Dynamic Load Rating (Cr):225,000; Bearing number:SA45ET-2RS; Thread Size (G):M42 X 3; Bore Center to Body (l7):52; Bearing Type - steel-on-PTFE fabric, sealed:steelonPTFE fabric,; Material - Body - Carbon steel-zinc plated, Ball - Hardened chrome steel-chrome plated, Liner:PTFE fabric material; Static Load Rating (Cor):240,000; Rod End Width (d2):102.000; Weight (g):2,500.00; Bore Dia (d):45.0000; |
| 40BWD12 Bearing 40×74×42mm | Design Units:Imperial; K - Factor8:1.64; Aa - Cage-Cone Backface Clearance:-0.01 in; Cage Type:Stamped Steel; Cg - Geometry Factor:0.0448; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:2710 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:1560 lbf; d:0.6250 in; Series:05000; R - Cone Backface To Clear Radius3:0.06 in; |
| 3312 Angular Contact Ball Bearing | Design Units:Imperial; Cone Part Number:455; da - Cone Frontface Backing Diameter:2.32 in; G1 - Heat Generation Factor (Roller-Raceway):58.6; Series:455; d:2 in; C0 - Static Radial Rating:37200 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:9370 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:36100 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:5380 lbf; |