| 7001ACE/HCP4A Bearings 12x28x8mm | db - Cone Backface Backing Diameter:2.13 in; Y2 - ISO Factor10:1.29; Cg - Geometry Factor12:0.0899; T - Bearing Width across Cones:2.1875 in; Cone Part Number:44143; D:3.6250 in; e - ISO Factor8:0.78; G1 - Heat Generation Factor (Roller-Raceway)11:22.9; Cage Type:Stamped Steel; B - Cone Width:0.9330 in; |
| CSED065 Thin Section Bearing 165.1x190.5x12.7mm | R:1,5 mm; Factor (G1):33,8; r:1,3 mm; Outer Diameter (mm):88,9; Width (mm):20,638; Size (mm):50.8x88.9x20.638; D:88,9 mm; Bore Diameter (mm):50,8; Factor (G2):14; Db:81 mm; |
| CSXD120 Thin Section Bearing 304.8x330.2x12.7mm | Design Units:METRIC; d:50 mm; Limiting Speed (Oil):35280 rpm; Bearing Width:16 mm; Limiting Speed (Grease):17640 rpm; Ball Type:Ceramic; R - Inner Ring To Clear Radius2:1.0 mm; Cage Type:CR - Phenolic Outer; do - Ball Diameter:8.73125 mm; D:80 mm; |
| QJ318 Four Point Contact Ball Bearing 90*190*43mm | B:102 mm; Ba:97,7 mm; Basic dynamic load rating (C):1210 kN; Bearing number:RN2328-E-MPBX; X:70 mm; d:140 mm; Bore Diameter (mm):140; Brand:FAG; Ew:264 mm; Basic static load rating (C0):1400 kN; |
| 7808CG/GNP4 Bearings 40x52x7mm | Brand:SNR; Compatibility:SUBARU / JUSTY / en; Designation SX:CX401; Designation Ruville:8107; Designation FAG:713622130; Bearing number:R181.07; Designation SKF:VKBA 1422; |
| 7309 BEGBP Ball Bearings Radial And Axial Loading 45 X 100 X 25mm | Db max:85,5 mm; Brand:NTN; Angle (α):40 °; da min.:57 mm; Weight:0,932 Kg; r min.:1,1 mm; Outer Diameter (mm):90; Bore Diameter (mm):50; r1 min.:0,6 mm; 2B:40 mm; |
| FAG 7311-B-MP-UA Bearings | Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Lube Hole Dia. (dl):6.000; Bore Diameter (mm):30; Bearing number:AST800 3015; Average Clearance (Cd):0.1270; Wall Thickness (S3):1.950; ID Chamfer Angle (B deg.):35; Shaft Dia., Nominal (d):30.0000; Housing Bore Dia. (Dh) - 34 +0.025 / -0:34 +0.025 / 0; Bearing Outside Diameter, Nominal(Do):34.000; |
| 30TAB06DB Ball Screw Support Bearing 30x62x30mm | Width (mm):43,658; Size (mm):53.975x122.238x43.65; Bearing number:5577/5535; T:43,658 mm; Outer Diameter (mm):122,238; Brand:Timken; B:43,764 mm; d:53,975 mm; Bore Diameter (mm):53,975; r:3,3 mm; |
| 45TAB07DT Ball Screw Support Bearing 45x75x30mm | Cg - Geometry Factor:0.0565; R - Cone Backface To Clear Radius1:3.560 mm; D:60.325 mm; Ab - Cage-Cone Frontface Clearance:2 mm; a - Effective Center Location3:-5.8 mm; d:28.575 mm; G1 - Heat Generation Factor (Roller-Raceway):12.5; Cup Part Number:1931; C90 - Dynamic Radial Rating (90 million revolutions)4:2820 lbf; Y - ISO Factor9:1.82; |
| 7004ACE/HCP4A Bearings 20x42x12mm | G1 - Heat Generation Factor (Roller-Raceway):3440; Y - ISO Factor9:1.88; R - Cone Backface To Clear Radius1:3.300 mm; C0 - Static Radial Rating:348000 lbf; r - Cup Backface To Clear Radius2:3.30 mm; Bearing Weight:18.90 Kg; C90 - Dynamic Radial Rating (90 million revolutions)4:36500 lbf; C - Cup Width:31.750 mm; Cone Part Number:80180; Series:80000; |