| No. | Brand | D | u | r | c | o | n | B | e |
| 206-19S | NSK | - | - | - | - | - | - | 14,000 mm | - |
| 3-phase | Rexroth | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | 18 mm | - |
| 4X8 | - | 75 mm | - | - | - | - | - | 16 mm | - |
| 30x62x16 | - | - | - | - | - | - | - | - | - |
| PV2R34 | YUKEN | 190,5 mm | - | - | - | - | - | 39,69 mm | - |
| 2788, | Timken | 188 mm | - | - | - | - | - | 60,5 mm | - |
| CL2B-DA11 | - | - | - | - | - | - | - | - | - |
| B7001-E-T-P4S-DUM | - | - | - | - | - | - | - | - | - |
| 6mm | INA | - | - | - | - | - | - | - | - |
| 4.75mm | - | - | - | - | - | - | - | - | - |
| (Zhv27) | - | - | - | - | - | - | - | 19 mm | - |
| 10 | - | - | - | - | - | - | - | 50 mm | - |
| 31Q8-17002P | - | - | - | - | - | - | - | - | - |
| 200x350 | - | - | - | - | - | - | - | 27 mm | - |
| 40lpm | - | 290 mm | - | - | - | - | - | - | - |
| 2400x1200x12mm | INA | - | - | - | - | - | - | - | - |
| 202KLD4 | FAFNIR | - | - | - | - | - | - | 34 mm | - |
| MS2301 | Parker | 55 mm | - | - | - | - | - | 32 mm | - |
| 2-Tank | - | - | - | - | - | - | - | - | - |
| 6908 | NTN | - | - | - | - | - | - | - | - |
| 3-Layer/Hardwood | - | - | - | - | - | - | - | - | - |
| CL2B-DA04 | - | 180 mm | - | - | - | - | - | 46 mm | - |
| 1980-1984 | Timken | 161,925 mm | - | 1,5 mm | - | - | - | - | - |
| 1100*1100*140 | - | - | - | - | - | - | - | - | - |
| SA4000FB | - | - | - | - | - | - | - | - | - |
| Hm710 | - | - | - | - | - | - | - | - | - |
| 82 | - | 53 mm | - | - | - | - | - | - | - |
| 15120 | koyo | - | - | - | - | - | - | - | - |
| 7 | - | 20 mm | - | - | - | - | - | - | - |
| 7308A Angular Contact Ball Bearing 40x90x23mm | d:180 mm; Outer Diameter (mm):320; Basic static load rating (C0):1597 kN; B:86 mm; Bore Diameter (mm):180; Size (mm):180x320x91; D:320 mm; Weight:29,5 Kg; (Grease) Lubrication Speed:1454 r/min; T:91 mm; |
| QJF1040 Angular Contact Ball Bearing 200x310x51mm | Weight:6.100 kg; Groove Width A:8 mm; Dynamic Load Rating:460,000 N; Radial Clearance:0.080 to 0.110 mm; Center Guidance:Floating Steel Ring; Configuration:Double Row; Limiting Speed - Oil:3,800 rpm; Da (max):176 mm; Static Load Rating:410,000 N; Roller Profile:Symmetric; |
| 7208 BECBJ Angular Contact Ball Bearing Assembly 35 X 80 X 21mm | db - Cone Backface Backing Diameter:1.32 in; Design Units:Imperial; Series:15000; G2 - Heat Generation Factor (Rib-Roller End):7.58; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2090 lbf; R - Cone Backface To Clear Radius3:0.03 in; Cg - Geometry Factor:0.0606; Ab - Cage-Cone Frontface Clearance:0.07 in; B - Cone Width:0.8125 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:23400 lbf; |
| KB055AR0 Bearings | Basic static load rating (C0):79 kN; Ew:50 mm; Basic dynamic load rating (C):34,8 kN; Outer Diameter (mm):50; Fw:45 mm; Bc:27 mm; Weight:0,046 Kg; Bore Diameter (mm):45; Bearing number:KT 455027; Brand:IKO; |
| 3810-2RS Double Row Angular Contact Ball Bearing 50x65x12mm | d:26,988 mm; Bore Diameter (mm):26,988; D:50,292 mm; Width (mm):14,224; Outer Diameter (mm):50,292; Brand:Fersa; Bearing number:L44649/L44610; Size (mm):26.988x50.292x14.224; |
| 7852CG/GNP4 Bearings | S:1 mm; Fw:50 mm; r:1 mm; Brand:Timken; Bore Diameter (mm):40; Basic static load rating (C0):71,3 kN; Bearing number:NKJS40; (Grease) Lubrication Speed:8700 r/min; Weight:0,292 Kg; C:22 mm; |
| 55TAB10DT Ball Screw Support Bearing 55x100x40mm | Oil Lubrication - B/C/O Seal:1200 rpm; Dimension BC:7.88 in; Oil Lubrication - M/N Seal:1500 rpm; Dimension RV:0.19 in; Pre Install Clearance Min:0.095 mm; Shaft Size :2-3/4 in; Eng Internal Radial Clearance - Max:0.0055; Shaft Size Type:Imperial; Dimension F:9.5 in; Oil Lubrication - T Seal:2650 rpm; |
| 3800-B-2RSR-TVH Angular Contact Ball Bearing 10x19x7mm | D:73 mm; Outer Diameter (mm):58; Bearing number:AXW 50; B:4,2 mm; Basic static load rating (C0):140,9 kN; B1:4,5 mm; Width (mm):4,2; d:50 mm; Size (mm):50x58x4.2; D1:58 mm; |
| VEB30/NS7CE1 Bearings 30x47x9mm | ALP2:30; Weight / LBS:14.5; bomp:22228CDKE4; D_:250; cage type:Inner Ring Guided; Adapter Part Number:SNW3128 H3128 HA3128; UNSPSC:31171510; DA_:27.5; Basic static load rating (C0):930 kN; Y0:2.6; |
| QJF240 Angular Contact Ball Bearing 200x360x58mm | Size (mm):340x460x160; R:400 mm; Bore Diameter (mm):340; D:460 mm; Angle:3,8 °; C:135 mm; Width (mm):160; Outer Diameter (mm):460; B:160 mm; d:340 mm; |
: Angular Contact Bearings - Radial Ball
Results 1 - 16 of 211 - Online shopping for Angular Contact Bearings - Radial Ball Bearings from a great selection at Industrial & Scientific Store
Angular Contact Ball Bearings - Ball Bearings - Grainger
When it comes to Angular Contact Ball Bearings, Grainger's got your back. Easy online ordering and next-day delivery available with 24/7 expert product
Angular contact ball bearings
Angular contact ball bearings. Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
Angular Contact Ball Bearings | The Timken Company
Timken® Angular Contact Ball Bearings can handle radial and axial loading, and perform well in high-speed and high-precision applications. See sizes, product
Angular Contact Ball Bearings | AST Bearings
Angular contact ball bearings can withstand high radial-axial loads and reach high speeds. They are asymmetrical for manufacturing reasons and can withstand
What is an Angular Contact Ball Bearing? - Ritbearing
Oct 6, 2014 - Angular contact ball bearings are a type of rolling-element bearing. As the name implies, rolling-element bearings use a roller or ball to carry a
Ball bearing - Wikipedia
Jump to Angular contact - An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing,
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular Contact Ball Bearings | Ball Bearings | Products | NSK
The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers
35BD5222 Bearing 35×52×22mm Video