| 110BAR10S Angular Contact Thrust Ball Bearing 110x170x54mm | Seal Type:Kevlar Packing Seal; Series Type:Light Series; Bearing UPC:013992027344; Dimension Y:0.9 in; Dimension U:0.3 in; Dimension D:16.8 in; Dimension V:8.0 in; Shaft Size:5-11/16 in; Dimension N:18.3 in; Dimension S:3.4 in; |
| 71912C-P4 Angular Contact Ball Bearing | Characteristic outer ring frequency, BPF0:10.28 Hz; Characteristic rolling element frequency, BSF:8.92 Hz; C:25 mm; Calculation factor (e):0,44; Characteristic inner ring frequency, BPFI:12.72 Hz; Brand:NTN; Bore Diameter (mm):75; Dynamic load, C:131 kN; Basic static load rating (C0):197 kN; D:120 mm; |
| BEAM 17/62/C SQP60 Angular Contact Thrust Ball Bearing 17x62x25mm | Dimension D:13.5 in; Note:This product line wa; Bearing UPC:013992026712; Ca - Axial Load Rating:4181.39 lbf; Series Type:Light Series; Maximum Speed:1970 rpm; Shaft Size:4.25 in; Cr - Dynamic Load Rating:71040 lbf; Dimension N:15.0 in; Seal Type:Felt Seal; |
| 7306 BEY Angular Contact Bearing 30 X 72 X 19mm | Width (mm):69,800; Outer Diameter (mm):200,000; Size (mm):110x200x69.800; Bore Diameter (mm):110,000; D:200,000 mm; d:110,000 mm; Bearing number:23222EAKW33; H:69,800 mm; Brand:SNR; |
| 7308 BECAP Angular Contact Ball Bearing Assembly 40 X 90 X 23mm | K - Factor2:1.37; Db - Cup Backface Backing Diameter:117.09 mm; G2 - Heat Generation Factor (Rib-Roller End):27; D:130.000 mm; Cup Part Number:Y33215; G1 - Heat Generation Factor (Roller-Raceway):111.4; C - Cup Width:31.000 mm; Y - ISO Factor4:1.4; e - ISO Factor3:0.43; r - Cup Backface To Clear Radius1:1.52 mm; |
| 3909-2RS Double Row Angular Contact Ball Bearing 45x68x16mm | D:85 mm; Radial Clearance:0.018 to 0.036 mm; Limiting Speed - Oil:9,300 rpm; ra (max):1 mm; b (min):1.9 mm; Snap Ring Width:1.7 mm; Factor fo:14.1; Snap Ring Outside Diameter:91.6 mm; Enclosure:Single Shield with S; Bore Type:Cylindrical Bore; |
| FAG 7214-B-TVP-UA Bearings | d:20 mm; T:19,25 mm; Size (mm):20x52x19.25; B:18 mm; D:52 mm; Outer Diameter (mm):52; Bearing number:HI-CAP 57355; Width (mm):19,25; Bore Diameter (mm):20; Brand:KOYO; |
| 7206 BEGBP Angular Contact Ball Bearing 30 X 62 X 16mm | Bearing number:29338E; Bore Diameter (mm):190,000; H:78,000 mm; D:320,000 mm; d:190,000 mm; Width (mm):78,000; Brand:SNR; Outer Diameter (mm):320,000; Size (mm):190x320x78; |
| 555800 Bearing 40×76×33mm | Inventory:0.0; UNSPSC:31171552; Outer Diameter (mm):46,838; Height:0.625 Inch | 15.875; Rolling Element:Ball Bearing; T:0,625 inch; Category:Thrust Ball Bearing; Cage Material:Steel; Bore 2:0.906 Inch | 23.012; |
| 718/13C/P2 Angular Contact Ball Bearing 13x24x6mm | e - ISO Factor8:0.41; Cg - Geometry Factor:0.0612; D:67.277 mm; Aa - Cage-Cone Backface Clearance:0.3 mm; Series:LM67000; db - Cone Backface Backing Diameter:42.42 mm; d:31.750 mm; Y - ISO Factor9:1.46; a - Effective Center Location3:-3 mm; K - Factor7:1.42; |