| No. | Brand | D | u | r | c | o | n | B | e |
| GRA40 | INA | - | - | - | - | - | - | 46 mm | - |
| A-14 | Bower | 130,000 mm | - | - | - | - | - | 31,000 mm | - |
| 16mm | - | - | - | - | - | - | - | 24 mm | - |
| 6305 | - | - | - | - | - | - | - | - | - |
| 5208-2NSL | Nachi | 280 mm | - | - | - | - | - | - | - |
| PC450-7 | - | - | - | - | - | - | - | - | - |
| SK135 | - | 55 mm | - | - | - | - | - | - | - |
| CO2 | - | 170 mm | - | - | - | - | - | 43 mm | - |
| 5209-2RS | - | - | - | - | - | - | - | - | - |
| 12 | - | 336,55 mm | - | - | - | - | - | 41,275 mm | - |
| YSQ-3 | - | - | - | - | - | - | - | 40 mm | - |
| 18 | - | - | - | - | - | - | - | - | 0,44 |
| E27 | - | - | - | - | - | - | - | 122 mm | - |
| MS2301 | Parker | 55 mm | - | - | - | - | - | 32 mm | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 6*12*4mm | - | 440 mm | - | - | - | - | - | - | - |
| 2- | koyo | - | - | 0,8 mm | - | - | - | - | - |
| 40000 | - | - | - | - | - | - | - | 14 mm | - |
| 796 | NTN | 190 mm | - | - | - | - | - | - | - |
| 16mm | - | 68 mm | - | - | - | - | - | - | - |
| 600*1200mm | - | - | - | - | - | - | - | - | - |
| 2005-2009 | NSK | - | - | - | - | - | - | - | - |
| 62960 | - | - | - | - | - | - | - | - | - |
| 32BD45DDU Air Conditioner Compressor Bearing 32x55x23mm | Bolt Qty:2; C0 Static Load Rating:219; A1:80 mm; Max Grease Speed:4200; C1 Dynamic Load Rating:225; Seal Type:Taconite; UPC Code:999999999; J:230 mm; Bearing:21312K; N:18 mm; |
| QJ336-N2-MPA Bearing 180x380x75mm | Bearing number:23120AX; Outer Diameter (mm):165; Brand:NACHI; Bore Diameter (mm):100; Size (mm):100x165x52; Calculation factor (Y1):1,98; D:165 mm; d:100 mm; C:52 mm; Basic dynamic load rating (C):450 kN; |
| 5318-2RS Double Row Angular Contact Ball Bearing 90x190x73mm | Material:Cast bronze with sol; Outer Diameter (mm):24; Shaft Dia., Nominal (d):18.0000; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing Outside Diameter, Nominal(Do):24.000; Brand:AST; Housing Bore Dia. (Dh) - 24 +0.021 / -0:24 +0.021 / 0; Bearing number:AST650 182430; Bearing Outside Diameter Tolerance (Do tol.):24 +0.021 / +0.008; OD Chamfer Length (Co):2.000; |
| 71964C DBL P4 Angular Contact Ball Bearing (320x440x56mm) | B:46 mm; D:280 mm; r1:1.1 mm; Basic dynamic load rating (C):335 kN; Limiting Speed - Grease:1,500 rpm; Bearing number:7036DT; ra1 (max):1 mm; da min.:189 mm; Basic static load rating (C0):505 kN; Configuration:Duplex; |
| 3914-2RS Double Row Angular Contact Ball Bearing 70x100x23mm | Tensioning Unit Type:Push Type; Note:This product line wa; Dimension B:6.0 in; Dimension P:0.9 in; Bearing Number:LSM75BR; Cr - Dynamic Load Rating:31024 lbf; Bearing Type:Split Cylindrical Re; Dimension U:0.2 in; Dimension H:1.6 in; Dimension D:9.0 in; |
| 71821ACD/HCP4 Angular Contact Ball Bearing | D2 ≈:46.21 mm; Bearing number:6205/VA201; d1:34,3 mm; Weight:0,13 Kg; Other Features:Deep Groove | Extrem; Limiting speed:230 r/min; resistance features:Corrosion Resistant,; Bore Diameter (mm):25; Temperature -:30 to +250 °; B:15 mm; |
| 3908-ZZ Double Row Angular Contact Ball Bearing 40x62x16mm | Calculation factor (e):0,35; e:0.35; Oil lub.:5200; da min.:65 mm; Bore Diameter (mm):55,575; da:65.0; r2 min.:0,8 mm; Width (mm):21; r(min):2.4; Db:92 mm; |
| 7900UCG/GNP5 Bearings | Bearing Number:22230K; F:4.75 in; Full Timken Part Number:SDAF225305-1/4; E Max.:18.2500 in; A:6.3125 in; No. of Base Bolts Required:4; H1:12.8125 in; Bolt Hole Length:1.75 in; Adapter Assembly Number3:SNW-30 x 5-1/4; Y:2.5781 in; |
| 3219 Angular Contact Ball Bearing | r1 - min.:0.6 mm; Brand:SKF; Tightening torque (Bolt grade 10.9):34 N·m; Limiting speed for oil lubrication:260 mm/min; H:55 mm; Basic static load rating - axial direction C0:780 kN; Size:M8; Axial preload:7.3 kN; N1:15 mm; Frictional moment - CRL:25 N·m; |
| 30/5-B-2RSR-TVH Angular Contact Ball Bearing 5x14x7mm | S1:36,399 mm; H1:23,394 mm; d3:69,012 mm; A:62,51 mm; N:18,009 mm; Brand:INA; Category:Bearings; B:48,489 mm; H2:124,892 mm; Thread (Q):1/8 NPT; |
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular Contact Ball Bearings - Ball Bearings - Grainger
When it comes to Angular Contact Ball Bearings, Grainger's got your back. Easy online ordering and next-day delivery available with 24/7 expert product
Angular Contact Ball Bearings | AST Bearings
Angular contact ball bearings can withstand high radial-axial loads and reach high speeds. They are asymmetrical for manufacturing reasons and can withstand
: Angular Contact Bearings - Radial Ball
Results 1 - 16 of 211 - Online shopping for Angular Contact Bearings - Radial Ball Bearings from a great selection at Industrial & Scientific Store
Ball bearing - Wikipedia
Jump to Angular contact - An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing,
Angular Contact Ball Bearings | Ball Bearings | Products | NSK
The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers
Angular contact ball bearings
Angular contact ball bearings. Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
What is an Angular Contact Ball Bearing? - Ritbearing
Oct 6, 2014 - Angular contact ball bearings are a type of rolling-element bearing. As the name implies, rolling-element bearings use a roller or ball to carry a
Angular Contact Ball Bearings | The Timken Company
Timken® Angular Contact Ball Bearings can handle radial and axial loading, and perform well in high-speed and high-precision applications. See sizes, product
71820 Angular Contact Ball Bearing 100*125*13mm Video