| HTA011DB Angular Contact Ball Bearing 55x90x33mm | d:10 mm; Basic dynamic load rating (C):15 kN; Size (mm):10x28x16; Bore Diameter (mm):10; Basic static load rating (C0):15,1 kN; Weight:0,054 Kg; Bearing number:NKIS 10; C:16 mm; Outer Diameter (mm):28; D:28 mm; |
| HCB71916 C T P4S TBTL Bearing 80x110x16mm | Thread (G):M6x1; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; C:25.7 kN; A:28 mm; Bore Diameter (mm):35; d1:51.1 mm; T max.:100 °C; Basic dynamic load rating (C):25,7 kN; W:2 mm; |
| B7004E.2RSD.T.P4S.UL Angular-Contact Ball Bearing 20 X 42 X 10mm | C:30 mm; Width (mm):30; Outer Diameter (mm):160; D:160 mm; ra max.:2.0 mm; B:30 mm; d:90 mm; Bore Diameter (mm):90; Weight:2.15 Kg; da min.:100 mm; |
| BTM 120 A/P4CDBB Angular Contact Thrust Ball Bearings 120x180x54mm | Basic static load rating (C0):4,25 kN; Da (max):31 mm; d:12 mm; Outer Diameter (mm):37; Dynamic Load Rating:9,750 N; Bearing number:6301-2NKE9; Limiting Speed - Grease:20,000 rpm; Configuration:Single Row; Basic dynamic load rating (C):9,75 kN; r min.:1.0 mm; |
| 46120K Bearing | Size (mm):60x85x17; T:17 mm; Basic dynamic load rating (C):35,8 kN; d:60 mm; Brand:CX; Bore Diameter (mm):60; Width (mm):17; Weight:0,2 Kg; (Grease) Lubrication Speed:2600 r/min; Outer Diameter (mm):85; |
| DAC3872ACS42 Bearing 38×72×34mm | Basic dynamic load rating (C):49,4 kN; Width (mm):25,4; Bore Diameter (mm):228,6; C0r:65.3; r(min):2; Bearing No.:KGX090; d:228,6 mm; Bearing number:KGX090; Outer Diameter (mm):279,4; D:279,4 mm; |
| 514478 Bearing 160x215x50mm | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:6020 lbf; Da - Cup Frontface Backing Diameter:4.49 in; T - Bearing Width across Cones:3.1460 in; Aa - Cage-Cone Backface Clearance:0.07 in; Ab - Cage-Cone Frontface Clearance:0.07 in; Cone Part Number:33275; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:8060 lbf; C - Double Cup Width:2.6490 in; Design Units:Imperial; R - Cone Backface To Clear Radius1:0.14 in; |
| 7320 BECBM Angular Contact Ball Bearing 100×215×47mm | Reference speed:20000 r/min; Brand:SKF; U:10 mm; Bearing number:K20x24x10; Fw:20 mm; Basic dynamic load rating (C):8,58 kN; Ew:24 mm; Basic static load rating (C0):12,9 kN; Fatigue load limit (Pu):1,46; Weight:0,0065 Kg; |
| 71938AC DF P5 Bearings | Outside Diameter D:4.331 in; Sub Series:G1…KLL; Dimension M:0.202 in; Static Load Rating:8080 lbf; Lubrication Type:Relubricatable; Angle between Set Screws:90 º; Seal Type:Labyrinth Seal; Radius r:0.6 mm; Weight:0.50 lb; Outside Ring Width C:27.000 mm; |
| HS7016C-T-P4S Spindle Bearing 80x125x22mm | Shaft Size Type:Imperial; Dimension L:4.46 in; Dimension F:14.25 in; Dimension J (Bolt Size):1.000 in; Int Radial Clearance Reduction Max:0.0028 in; Pre Install Clearance Max:0.0067 in; C - Dynamic Load (Basic):125000 lb; Y2 - Geometry Factor:4.06; Dimension A:4.25 in; Dimension G:3.960 in; |