| 3204 RS Angular Contact Ball Bearing | a:41 mm; Fatigue load limit (Pu):1,84; d:40 mm; Basic static load rating (C0):36,5 kN; Bore Diameter (mm):40; Size (mm):40x80x30.2; Outer Diameter (mm):80; r min.:1,1 mm; D1:67,9 mm; Weight:0,594 Kg; |
| 3201 2RS Angular Contact Ball Bearing | Size (mm):30x42x7; Outer Diameter (mm):42; C:7 mm; B:7 mm; D:42 mm; d:30 mm; Width (mm):7; Bearing number:61806; Bore Diameter (mm):30; Brand:ISO; |
| 60TAB12DF Ball Screw Support Bearing 60x120x40mm | C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:4880 lbf; Cage Type:Stamped Steel; T - Bearing Width across Cones:2.6250 in; Aa - Cage-Cone Backface Clearance:0.02 in; Bearing Weight:2.51 lb; Series:2500; db - Cone Backface Backing Diameter:1.63 in; Cup Part Number:2523D; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2280 lbf; |
| 71814C DBL P4 Angular Contact Ball Bearing (70x90x10mm) | Compatibility:HONDA / CIVIC / eng; Designation SKF:VKBA 3246; Designation FAG:713617040; Brand:CX; Bearing number:CX551; |
| QJ222-N2-MA Four Point Contact Bearing 110x200x38mm | Width (mm):80; Bore Diameter (mm):220; D1:268 mm; d:220 mm; Bearing number:RB4944; da min.:231 mm; Basic static load rating (C0):1620 kN; C:80 mm; Size (mm):220x300x80; r min.:2.1 mm; |
| 3314-B-2HRS-TVH Double Row Angular Contact Ball Bearing 70x150x63.5mm | Basic static load rating (C0):32 kN; Outer Diameter (mm):68; Da1 (max):63 mm; da1 (min):45 mm; r1:0.6 mm; Outside Diameter:68 mm; Limiting Speed - Grease:12,000 rpm; Bore Type:Cylindrical Bore; 2B:30 mm; C:15 mm; |
| 71902CTRSULP4 Super Precision Ball Bearing 15x28x7mm | Dimension B:4.5 in; Seal Type:High Temperature Pac; Support Type:Take-Up; Dimension U:0.2 in; Cr - Dynamic Load Rating:18659 lbf; Dimension D:7.0 in; Dimension V:3.5 in; Maximum Speed:4630 rpm; Dimension P:0.6 in; Dimension S:1.1 in; |
| 3911-2RS Double Row Angular Contact Ball Bearing 50x80x19mm | Bore Diameter (mm):12; Basic dynamic load rating (C):6,67 kN; Ew:17 mm; Weight:0,0053 Kg; Bearing number:KT 121710 EG; Outer Diameter (mm):17; Brand:IKO; Bc:10 mm; Fw:12 mm; |
| 71821 Angular Contact Ball Bearing 105*130*13mm | B:34.9 mm; B4:4.75 mm; r1,2 min.:0.6 mm; Snap Ring:No; Product Group:M06110; B1:44.4 mm; Outside Diameter:2.047 Inch | 51.994; Basic static load rating C0:7.8 kN; Length Thru Bore:1.748 Inch | 44.399; Mounting Method:Eccentric Collar; |
| 3218 Angular Contact Ball Bearing | Dimension K :2-3/4 in; Dimension M :4-3/4 in; Cor - Static Load Rating:82399 lbf; Note:This product line wa; Dimension J1 :14-1/2 in; Dimension H2:10.45 in; Bolt Size:4 x 3/4; Shaft Size:3.75 in; Housing Width:5.2 in; Dimension H :4-15/16 in; |