| F-621532.01 Cylindrical Roller Bearing 40x58x14mm | Unit Body Material:Cast Iron; Lubrication method:Oil Supply Type; d:40; Basic Load Rating, Static Rating(N):20400; B:54; Bearing Unit, Type:Pillow Type; Bearing Inner Dia. Shape:Tapered hole adapter; Unit, Type:Bearing unit; |
| F-611954.01.NJ Automobile Bearing / Cylindrical Roller Bearing | d:49.21 mm; B:51.6 mm; A:41.6 mm; J:157 mm; e:24 mm; S:19 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; C0:23.2 kN; G:R1/8"; |
| HK13X21X12 Needle Roller Bearing 13x21x12mm | C0:15.6 kN; Recommended tightening torque for set screw:8.3 Nm; e:19 mm; L:116 mm; T min.:-20 °C; A2:44.4 mm; A1:14.5 mm; N:14mm; T max.:100 °C; s1:21.45 mm; |
| BT1-1767 Tapered Roller Bearing | R - Inner Ring To Clear Radius2:2.0 mm; Contact Angle:15 º; Ball Type:STEEL; Cage Type:CR - Phenolic Outer; Design Units:METRIC; Limiting Speed (Oil):18800 rpm; Bearing Width:28 mm; do - Ball Diameter:20.63750 mm; r - Outer Ring To Clear Radius3:2.0 mm; d:85 mm; |
| Fc40857 Auto Gate Bearing | Dimension N:10.5 in; Bearing UPC:013992026149; Bearing - Housing - Seal UPC:013992039163; Dimension H:1.6 in; Dimension R:1.3 in; Ca - Axial Load Rating:1708.53 lbf; Maximum Speed:3310 rpm; Tensioning Unit Type:Tension Type; Bearing - Housing - Seal:LSE300BRHATL; Dimension T:12.0 in; |
| 91122-RZH-003 / 91122RZH003 Automobile Tapered Roller Bearing 40x76x20.5mm | Mass:0.04 kg; Characteristic outer ring frequency, BPF0:2.61 Hz; B:11 mm; da min:19 mm; Nlim (grease):19,000 rpm; da max:20 mm; Radial clearance class:CN; Fatigue limit load, Cu:0.16 kN; Min operating temperature, Tmin:-25 °C; Characteristic cage frequency, FTF:0.37 Hz; |
| 36DSF02 Deep Groove Ball Bearing 36x67x23mm | G:M6x1; s1:32.55 mm; T min.:-20 °C; B:65.1 mm; A1:18 mm; Z:44.6 mm; T max.:200 °C; C0:32.8 kN; Weight:3.97 kg; C:52.5 kN; |
| 41303-42022 Deep Groove Ball Bearing 95x120x17mm | Number of Bearings:Single; Lateral Width L(mm):50; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):10; Bearing Part Number:6800; Width T(mm):10; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; |
| 688808 Thrust Ball Bearing 40x67x14.5mm | Precision class:P4; Axial rigidity:73 N/µm; Dynamic load, C:4.45 kN; r1s min:0.3 mm; Contact angle α:25 °; D2:28.22 mm; Radial rigidity:147 N/µm; d:17 mm; Brand:SNR; B:7 mm; |
| 2N2-SC03B02LLVAXCM/L696 Deep Groove Ball Bearing 17x62x21mm | Number of Bearings:Single; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel; RoHS:6; Bearing Retained:Yes (with retaining; |