| No. | Brand | D | u | r | c | o | n | B | e |
| 10way | - | - | - | - | - | - | - | - | - |
| 71215SN2SN00 | Parker | - | - | - | - | - | - | - | - |
| NPS103RPC | Bower | 158.75 mm | - | - | - | - | - | - | - |
| EE241701/242375 | koyo | 62 mm | - | - | - | - | - | 48 mm | - |
| 4X8 | - | 42 mm | - | - | - | - | - | 13 mm | - |
| HCB71818E.TPA.P4.UL | - | 140 mm | - | - | - | - | - | - | - |
| SH210-5 | - | - | - | - | - | - | - | - | - |
| 3ton | - | 130 mm | - | - | - | - | 2,5 mm | 60 mm | - |
| 23234-kb-c3 | - | - | - | - | - | - | - | - | - |
| F11-SQP21-21-11-1DC-18 | - | - | - | - | - | - | - | - | - |
| D1UW20DNYC56-70 | Parker | 107,95 mm | - | - | - | - | - | - | - |
| 220g | INA | 68 mm | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| (VU140325) | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 1mm | - | - | - | - | - | - | - | 72 mm | - |
| 400 | - | 150 mm | - | - | - | - | - | - | - |
| 2545 | - | - | - | - | - | - | - | - | - |
| 6210 | SKF | 62 mm | - | - | - | - | - | - | - |
| 4 | - | 120 mm | - | - | - | - | - | - | - |
| 221SS | - | - | - | - | - | - | - | - | 0.55 |
| 10 | - | 440 mm | - | - | - | - | - | 118 mm | - |
| BMH315 | - | 24,000 mm | - | - | - | - | - | - | - |
| 511002 | Timken | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 71295SN1KNJ1 | Parker | 40,000 mm | - | - | - | - | - | 22 mm | - |
| PC750-7K | - | 105 mm | - | - | - | - | - | 27 mm | - |
| 15TAC47BSUC10PN7B Ball Screw Support Bearing 15x47x15mm | D2:46,4 mm; m:0,133 kg / Weight; d2:31,3 mm; D:52 mm; da min:30,6 mm; d:25 mm; Bearing number:6205-C-2HRS; Bore Diameter (mm):25; Width (mm):15; nG:12200 1/min / Limiti; |
| 7030ACM/DB Angular Contact Ball Bearing 150X225X70mm | Size (mm):190x290x46; B1:46 mm; Outer Diameter (mm):290; Bore Diameter (mm):190; Weight:9,3 Kg; Basic static load rating (C0):305 kN; Width (mm):46; d:190 mm; Angle (α):15 °; D:290 mm; |
| 5318-2RS Double Row Angular Contact Ball Bearing 90x190x73mm | Material:Cast bronze with sol; Outer Diameter (mm):24; Shaft Dia., Nominal (d):18.0000; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; Bearing Outside Diameter, Nominal(Do):24.000; Brand:AST; Housing Bore Dia. (Dh) - 24 +0.021 / -0:24 +0.021 / 0; Bearing number:AST650 182430; Bearing Outside Diameter Tolerance (Do tol.):24 +0.021 / +0.008; OD Chamfer Length (Co):2.000; |
| VEB25/NS7CE1 Bearings 25x42x9mm | a:28,5 mm; r min.:1,5 mm; D:150 mm; da min.:108,5 mm; Weight:1,28 Kg; Width (mm):24; d:100 mm; C:24 mm; Size (mm):100x150x24; r1 min.:1 mm; |
| 71916 CE/HCP4A Angular Contact Ball Bearings | Basic dynamic load rating (C):4,61 kN; D:42 mm; C:7 mm; d:30 mm; Width (mm):7; Outer Diameter (mm):42; Size (mm):30x42x7; Bore Diameter (mm):30; Bearing number:SS 61806-ZZ; Weight:0,026 Kg; |
| 7260B Angular Contact Ball Bearing 300X540X85mm | Bearing Type:Cage Retained Roller; Max Speed (Grease) (X1000 RPM):22,000; Dynamic Load Rating (Cr):1,980; Outer Diameter (mm):17,4498; Bore Diameter (mm):12,7; Static Load Rating (Cor):2,750; Shaft (Fw):0.500; Outer Dia (D):0.6870; Bearing number:SCE810; Weight (g):9.00; |
| Bearing 4052D | B:0.5940 in; Weight:0.2 lb; d - Bore Diameter:0.9470 in; Bearing Type:Thrust Tapered Rolle; Oil Holes in Retainer:Yes; Steering Pivot Rating:3900 lbf; R - Fillet Radius Shaft (Max):0.03 in; D - Bearing O.D.:1.8906 in; |
| 60TAB12SU Ball Screw Support Bearing 60x120x20mm | Ew:-; ra(max):2; (Grease) Lubrication Speed:4300 r/min; dd(min):-; C:33 mm; dc(min):-; r(min):2.1; rb(max):2; r min.:2.1 mm; Bearing No.:NJ313R; |
| 50TAB10DU Ball Screw Support Bearing 50x100x40mm | Size (mm):150x270x73; B:73 mm; Brand:NACHI; r min.:3 mm; Outer Diameter (mm):270; Basic static load rating (C0):990 kN; Fw:182 mm; Bearing number:NUP 2230 E; Basic dynamic load rating (C):660 kN; Bore Diameter (mm):150; |
| 71964ACD/P4A Angular Contact Ball Bearing 320x440x56mm | da - Cone Frontface Backing Diameter:3.04 in; Design Units:Imperial; Cage Type:Stamped Steel; C0 - Static Radial Rating:90900 lbf; a - Effective Center Location4:-0.76 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12300 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:149000 lbf; d:2.5625 in; G1 - Heat Generation Factor (Roller-Raceway):124; G2 - Heat Generation Factor (Rib-Roller End):22.4; |
What is an Angular Contact Ball Bearing? - Ritbearing
Oct 6, 2014 - Angular contact ball bearings are a type of rolling-element bearing. As the name implies, rolling-element bearings use a roller or ball to carry a
Angular Contact Ball Bearings | AST Bearings
Angular contact ball bearings can withstand high radial-axial loads and reach high speeds. They are asymmetrical for manufacturing reasons and can withstand
Ball bearing - Wikipedia
Jump to Angular contact - An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing,
Angular Contact Ball Bearings - Ball Bearings - Grainger
When it comes to Angular Contact Ball Bearings, Grainger's got your back. Easy online ordering and next-day delivery available with 24/7 expert product
Angular Contact Ball Bearings | The Timken Company
Timken® Angular Contact Ball Bearings can handle radial and axial loading, and perform well in high-speed and high-precision applications. See sizes, product
: Angular Contact Bearings - Radial Ball
Results 1 - 16 of 211 - Online shopping for Angular Contact Bearings - Radial Ball Bearings from a great selection at Industrial & Scientific Store
Angular Contact Ball Bearings | Ball Bearings | Products | NSK
The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers
Angular Contact Ball Bearings | NTN Bearing
Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one
Angular contact ball bearings
Angular contact ball bearings. Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads
706CE/P4A Bearings 6x17x6mm Video