| CSXF075 Thin Section Bearing 190.5x228.6x19.05mm | a:11,6 mm; Basic dynamic load rating (C):15,5 kN; Angle (α):15 °; Brand:CX; Width (mm):14; d:20 mm; Bore Diameter (mm):20; D:47 mm; C:14 mm; Weight:0,113 Kg; |
| 7202C/AC DBL P4 Angular Contact Ball Bearing (15x35x11mm) | Basic dynamic load rating (C):12,8 kN; A:50 mm; L1:376 mm; J:117 mm; Bearing number:UCTH202-10-150; L:318 mm; T1:88 mm; J2:65 mm; Width (mm):88; S:12,7 mm; |
| 71906 Angular Contact Ball Bearing 30*47*9mm | Basic static load rating (C0):751 kN; Basic dynamic load rating (C):443 kN; Size (mm):240x360x112; Outer Diameter (mm):360; Bore Diameter (mm):240; B1:112 mm; Weight:39,4 Kg; (Grease) Lubrication Speed:1400 r/min; D:360 mm; a:229,2 mm; |
| QJ319-N2-MPA Bearing 95x200x45mm | D:270 mm; Bore Diameter (mm):160; Bearing number:CRI-3201; T:140 mm; d:160 mm; Size (mm):160x270x140; Width (mm):140; Outer Diameter (mm):270; Brand:NTN; |
| FAG 7311-B-MP-UA Bearings | Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Lube Hole Dia. (dl):6.000; Bore Diameter (mm):30; Bearing number:AST800 3015; Average Clearance (Cd):0.1270; Wall Thickness (S3):1.950; ID Chamfer Angle (B deg.):35; Shaft Dia., Nominal (d):30.0000; Housing Bore Dia. (Dh) - 34 +0.025 / -0:34 +0.025 / 0; Bearing Outside Diameter, Nominal(Do):34.000; |
| BTM110B/DB Angular Contact Ball Bearing 110x170x54mm | Ab - Cage-Cone Frontface Clearance:0.06 in; d:1.7665 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:38700 lbf; a - Effective Center Location4:-0.19 in; C90 - Dynamic Radial Rating (90 million revolutions)5:5770 lbf; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:2.32 in; C0 - Static Radial Rating:29200 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:3720 lbf; |
| 7917UCG/GNP4 Bearings | Basic dynamic load rating (C):21,8 kN; B1:48,42 mm; Width (mm):36,51; C:16(1) mm; Brand:Timken; d:30,1625 mm; Bearing number:1103KL; Outer Diameter (mm):62; Weight:0,372 Kg; d1:44,1 mm; |
| 7314 ACM Angular Contact Ball Bearing 70×150×35mm | Nr. of Holes:8; Axial Load Factor Y2:2.58; Roller Profile:Symmetric; Static Load Rating:12,700,000 N; Retainer Material:Machined Brass; Fillet Radius/Chamfer:6 mm; Groove Width A:45 mm; D:720 mm; Axial Load Factor Y0:1.69; Enclosure:Open; |
| 7001CE/P4A Bearings 12x28x8mm | ra max:5 mm; Width (mm):20; d:95 mm; r1a max:2.5 mm; Mass:0.84 kg; e:0.58; Nlim (oil):3,000 rpm; a:30.9 mm; Category:Bearings; Characteristic rolling element frequency, BSF:14.09 Hz; |
| KA020XP0 Bearing 50.8x63.5x6.35mm | r - Cup Backface To Clear Radius2:1.52 mm; Da - Cup Frontface Backing Diameter:57.40 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:9720 lbf; Aa - Cage-Cone Backface Clearance:-0.5 mm; Bearing Weight:0.20 Kg; Ab - Cage-Cone Frontface Clearance:2.5 mm; G1 - Heat Generation Factor (Roller-Raceway):11.8; D:61.999 mm; Cg - Geometry Factor:0.0579; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1650 lbf; |