| FPCC400 Thin Section Bearing 101.6x120.65x9.53mm | outer ring width:21 mm; bore type:Round; D:3.1496 in; inner ring width:49.22 mm; B:1-15/16 in; finish/coating:Uncoated; series:GYM-KRRB; d:1.4375 in; snap ring included:Without Snap Ring; |
| PSL212-318 Single Row Thrust Ball Bearing 271.46x330.2x53.975mm | D:130 mm; d:75 mm; closure type:Open; fillet radius:1.5 mm; standards met:DIN 628-3; radial static load capacity:84000 N; maximum rpm:5200 RPM; finish/coating:Uncoated; contact angle:25 °; cage material:Polyamide; |
| FPCA308 Thin Section Bearing 88.9x101.6x6.35mm | closure type:Open; D:90 mm; B:36 mm; duplex type:Duplex Universal; internal clearance:ABEC 7; d:55 mm; contact angle:25 °; |
| 1-3/8 Inch Bore UCPA207-22 Pillow Block Ball Bearing | locking device:Set Screw; mounting type:Two-Bolt Flange; radial static load capacity:1080 lbf; series:UCFT200NPC4HR5; bore type:Round; B:4.4063 in; radial dynamic load capacity:2150 lbf; d:0.7500 in; housing material:Cast Iron - Nickel P; length through bore:0.866 in; |
| SMN202KB + COL Ball Bearing Housed Unit | frame type:Center Pull; base width:6 in; bolt center-to-center width:2-1/2 in; compatible bore diameter:3-11/16 to 4-1&; D:48 in; rod diameter:2 in; height to center line:7 in; travel:24 in; finish/coating:Uncoated; overall height:14-3/4 in; |
| NBC12712 Thin Section Bearing 127x152.4x12.7mm | ball width:0.4370 in; overall height:1.8125 in; radial static load capacity:715 lbf; head width:0.3120 in; thread direction:Right Hand; d:0.3125 in; shank thread length:0.6870 in; rod end type:Female Threaded; thread type:UNF-2B; race material:None; |
| 6006CE ZrO2 Full Ceramic Bearing (30x55x13mm) Deep Groove Ball Bearing | ring separation:Separable Outer Ring; internal clearance:C0; cage material:Brass; B:37 mm; precision rating:Not Rated; fillet radius:1.5 mm; static load capacity:265000 lbs; d:100 mm; flanges:(3) Inner; application:Electric Motors, Pri; |
| 16001CE ZrO2 Full Ceramic Bearing (12x28x7mm) Deep Groove Ball Bearing | series:TP; static load capacity:950000 lbs; washer width:0.812 in; fillet radius:1/4 in; thrust bearing type:Roller & Cage As; dynamic load capacity:389000 lb; d:8 in; D:14 in; housing washer inside diameter:8.094 in; B:3 in; |
| RCJT40 Housing Unit 40mm Shaft | cage type:Outer Ring Guided; closure type:Open; internal clearance:C3; application:Vibratory Applicatio; operating temperature range:-30 of +200 &de; maximum rpm:2600 RPM; d:160 mm; bore type:Straight; outer ring type:Not Split; lubrication hole type:Lubrication Groove &; |
| KD090AR0 Thin Section Ball Bearing | compatible bore diameter:50 mm; material:PBT Thermoplastic; end cap type:Closed End Cap; color:Black; |