| No. | Brand | h | a | T | e | Y | F | D | r |
| 20X32X7 | - | - | - | - | - | - | - | 62 mm | - |
| MSK075E-0300-FN-S2-AG3 | Rexroth | - | - | - | - | - | - | 1 in | - |
| 6810 | NSK | - | - | - | - | - | - | 3.7500 in | - |
| K3V180DT | - | - | - | - | - | - | - | 19mm | - |
| 70s | - | - | - | - | - | - | - | - | - |
| 35x72x14 | - | - | - | - | - | - | - | 520mm | - |
| 100% | - | - | - | - | - | - | - | - | - |
| POS25 | IKO | - | - | - | - | - | - | 170 mm | - |
| 1985-1987 | koyo | - | - | - | - | - | - | 10.2500 in | - |
| 1220X2440 | - | - | - | - | - | - | - | 1-1/4 in | - |
| 4*8FT | - | - | - | - | - | - | - | - | - |
| R900962277 | Rexroth | - | - | - | - | - | - | - | - |
| GE40ES | - | - | - | - | - | - | - | - | - |
| 5583 | Timken | - | - | - | - | - | - | 71-1/2 in | - |
| MPW04 | YUKEN | - | - | - | - | - | - | 0.8750 in | - |
| Im350 | - | - | - | - | - | - | - | 160 mm | - |
| MA-1205-EL | Bower | - | - | - | - | - | - | - | - |
| DR750 | - | - | - | - | - | - | - | 3.25 Inch | - |
| 300ML | - | - | - | - | - | - | - | - | - |
| 7020 | SKF | - | - | - | - | - | - | 160 mm | - |
| YG-0072 | - | - | - | - | - | - | - | 1.9380 in | - |
| ST4000FI | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | 47mm | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 971510 | - | - | - | - | - | - | - | 4.3307 in | - |
| HPVO91DS | - | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| 51110 Thrust Ball Bearing 50*70*14mm | SREX:0.05; db:40; r1:0.6; SRIN:0; ra:1; B_:17; yobi:7207AWDF; GRS rpm:6700; C:48.5; DE_:64.678; |
| UCFC206-18 Pillow Block Ball Bearing FC206 Bearing Housing Units | standards met:ASTM B584-78; maximum p value:3000 psi; overall length:13 in; groove/plug type:None; D:4 in; sleeve bearing type:Plain Sleeve; operating temperature range:Maximum of +800; d:2-1/4 in; maximum v value:750 fp/min; material specification:SAE 660 (C932&#; |
| 6206CE ZrO2 Full Ceramic Bearing (30x62x16mm) Deep Groove Ball Bearing | closure type:Open; finish/coating:Uncoated; precision rating:RBEC 1 (ISO Cla; bore type:Straight; series:A52; internal clearance:C0; cage material:Brass; d:28 mm; |
| ER210-31 / ER 210-31 Insert Ball Bearing With Snap Ring 49.213x90x51.6mm | Cage Type:Steel; d:95mm; D:170mm; Clearance:C3; B:43mm; Weight:0.02 KGS; SKU:2219jc3-qbl; Availability:In Stock; Seals or Shields:Open Type; |
| L10VA900 Thin Section Bearing 228.6x266.7x19.05mm | unit standoff:32.5 mm; pilot diameter:92.1 mm; locking device:Set Screw; series:UCFCF200NP; radial static load capacity:1570 kgf; bore type:Round; length through bore:42.9 mm; bolt circle diameter:111.1 mm; bolt size:M10; housing material:Cast Iron - Nickel P; |
| 8312 Thrust Ball Bearing 60x110x35mm | roller diameter:62 mm; closure type:Sealed; maximum rpm:1700 RPM; finish/coating:Uncoated; radial dynamic load capacity:6900 lbf; lubrication hole location:Inner Ring; bearing element:Needle Rollers; roller shape:Crowned; operating temperature range:-30 to +100 &de; radial static load capacity:14200 lbf; |
| KB055AR0 Thin Section Bearing 5.5''x6.125''x0.3125''Inch | Reference Speed Rating (r/min):5600; Dynamic Load Rating (kN):85; d:80mm; SKU:7216begap-skf; Weight:0.02 KGS; D:140mm; Static Load Rating (kN):75; Limiting Speed Rating (r/min):5600; Seals or Shields:Open Type; Cage Type:Plastic; |
| GN111KRRB2 L/C FS381A Insert Ball Bearing 42.672x99.822x42.672mm | Clearance:C3; D:35mm; Cage Type:Steel; B:11mm; Limiting Speed Rating (r/min):9500; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; Static Load Rating (kN):3.45; Availability:In Stock; SKU:6300-2rsr-c3-fag; |
| GE100-XL-KRR-B / GE100-KRR-B Insert Ball Bearing 100x180x75mm | shank thread length:66 mm; misalignment angle:17 °; radial static load capacity:95900 N; d:30 mm; thread direction:Right Hand; length to ball center:110 mm; shank thread size:M30x2; race material:Bronze; ball material:Steel; rod end type:Male Threaded; |
| KRG100 High Precision Thin Section Ball Bearing Robotic Arm Use | replacement bearing:22218; overall height:7.5600 in; D:8.88 to 10.88 in; B:4.17 in; base to bore centerline:3.7500 in; lubrication type:Lubrication Fitting; standards met:UL, AFBMA, AGMA, ASM; manufacturer catalog number:071713; housing material:Steel; maximum rpm:1825 RPM; |
51184MP Thrust Ball Bearings 420x500x65mm Video