| SA 207-22 Insert Ball Bearing 34.925x72x25.4mm | compatible bearing type:Spherical Roller; seal type:Triple Ring; compatible bore diameter:10-1/2 in; manufacturer upc number:662327946708; manufacturer product page:Click here; |
| ER212-38 / ER 212-38 Insert Ball Bearing With Snap Ring 60.325x110x65.1mm | Static Load Rating (kN):33.5; Oil Limiting Speed (r/min):20000; Clearance:Standard; Dynamic Load Rating (kN):39; SKU:7012acd/p4adga-skf; Grease Limiting Speed (r/min):13000; Preload:Light; B:18mm; Weight:0.40 KGS; D:95mm; |
| VAK 1-1/2 Inch Bearing Housed Unit | C0:157; da:71; SDM_:96; KBRG:4162; TSR rpm:5600; D_:130; Oil rpm:5600; C_conv:150000; DE_:115; mass:1.86; |
| VAK 7/8 Inch Bearing Housed Unit | lubrication type:Non-Lubricatable; race material:Brass; d:0.4375 in; shank thread size:7/16-20; misalignment angle:7 °; ball width:0.5620 in; ball material:52100 Alloy Steel; operating temperature range:Max 250 °F; series:Spherco®; overall height:2.6875 in; |
| KA065CP0 Thin Section Bearing 165.1x177.8x6.35mm | D:164 mm; thickness:14 mm; compatible bore diameter:85 mm; seal type:Double Lip; |
| 16015CE ZrO2 Full Ceramic Bearing (75x115x13mm) Deep Groove Ball Bearing | slot spacing:121 mm; overall height:167 mm; lubrication type:Lubrication Fitting; housing material:Cast Iron; seal type:Contact with Slinger; overall length:224 mm; unit type:Side Mount; locking device:Set Screw; manufacturer product page:Click here; slot width:26 mm; |
| UCFC210-32 Pillow Block Ball Bearing FC210 Bearing Housing Units | rod end type:Male Threaded with M; housing material:Carbon Steel - corro; d:0.1900 in; head width:.2500 in; grade:Commercial; length to ball center:1.2500 in; series:TM; operating temperature range:Max 350°; thread direction:Left Hand; ball material:Alloy Steel - heat t; |
| SS603ZZ Stainless Steel Anti Rust Deep Groove Ball Bearing | housing material:Cast Iron; d:2-15/16 in; bearing material:Babbitt; finish/coating:Powder Coated; overall length:10-3/4 in; mounting:Two-Bolt Base; D:8-1/2 in; duty type:Standard Duty; operating temperature range:Maximum of +130; overall height:4-7/8 in; |
| CSEC060 Thin Section Ball Bearing 152.4x171.45x9.525mm | typical application:Exceptional Bearing; construction description:ISO-GARD® Flange; pressure tolerance:Ambient; harmonization code:3926904590.US; D:6.2500 in; misalignment tolerance:0.020 in; lip material:Labyrinth; manufacturer catalog number:29519-7643; Weight:0.27 lb; maximum shaft surface speed:4500 fpm; |
| SS698 Stainless Steel Anti Rust Deep Groove Ball Bearing | overall length:8.6700 in; overall height:4.5000 in; application:Ideal solution for c; length through bore:2.8400 in; mounting:Two-Bolt Base; d:1.9375 in; lubrication type:Lubrication Fitting; D:6.8800 to 7.1200 in; locking device:Set Screw; housing material:Cast Iron; |