| FPCG3500 Thin Section Bearing 889x939.8x25.4mm | bearing material:Oil-Impregnated Bron; d:1/2 in; D:3/4 in; groove/plug type:None; sleeve bearing type:Flanged Bearing; standards met:SAE 841, CT-1000-K26; material specification:Oilite®, Synthet; maximum pv value:50000; flange width:1/8 in; |
| F5-10 High Precision Mini Small Flat Thrust Ball Bearing F5-10M | Preload:Light; Availability:In Stock; B:16mm; Weight:0.20 KGS; SKU:7206acd/p4adga-skf; Dynamic Load Rating (kN):23.4; D:62mm; d:30mm; Clearance:Standard; Cage Type:Plastic; |
| 53330 Thrust Ball Bearing 150x250x83.7mm | mounting:Two-Bolt Base; overall height:6.5625 in; locking device:Set Screw; bolt size:0.7500 in; operating temperature range:Max 250°; lubrication type:Lubrication Fitting; overall length:11.7500 in; housing material:Cast Iron; d:2.6875 in; expansion type:Expansion Bearing &#; |
| SAA206FP7 Insert Ball Bearing With Eccentric Collar Lock 30x62x35.7mm | lock nut outside diameter:120 mm; compatible bearing number:23218; d:80 mm; overall length:86 mm; lock nut number:KM18; material / coating:Steel; includes:Lock Washer (MB; thread size:M90x2; lock washer number:MB18; taper:1:12; |
| 140 x 11.811 Inch | 300 Millimeter x 2.441 Inch | 62 Millimeter KAC100 Super Thin Section Ball Bearing 254x266.7x6.35mm | row type & fill slot:Single Row Non-Fill; B:0.7874 in; bore type:Round; closure type:One Shield One Conta; snap ring included:Without Snap Ring; manufacturer catalog number:1189; d:30 mm; D:62 mm; Size (mm):140 x 11.811 Inch | 300 Millimeter x 2.441 Inch | 62 Millimeter ; |
| CSA 001-8F Insert Ball Bearing With Eccentric Collar 12.7x35x15.9mm | flange type:Non-Flanged Cup; series:565; assembly type:Cone & Cup; d:2.6250 in; finish/coating:Uncoated; D:5.0000 in; cup width:2.5625 in; dynamic load capacity:76900 lbf; compatible cone:NA569; cone width:1.5938 in; |
| BEAS008032-2RS Angular Contact Thrust Ball Bearing 8x32x20mm | Cage Type:Brass; Seals or Shields:Open Type; B:78mm; d:240mm; Clearance:Standard; Availability:In Stock; D:340mm; Weight:23.00 KGS; SKU:51248m-qbl; |
| KRG140 High Precision Thin Section Ball Bearing Robotic Arm Use | housing material:Carbon Steel - corro; head width:.4060 in; length to ball center:1.6250 in; ball material:Alloy Steel - heat t; misalignment angle:6 °; operating temperature range:Max 350°; shank thread size:3/8-24 in; ball width:.5000 in; race material:Bronze; head diameter:1.0000 in; |
| VCJ 1-1/8 Inch Bearing Housed Unit | seal type:Dual Lip with Slinge; slot width:0.2500 in; unit type:Side Mount; d:1.2500 in; overall height:4-1/64 in; overall length:4-59/64 in; locking device:Set Screw; lubrication type:Lubrication Fitting; slot spacing:2.4375 in; dynamic load capacity:4410 lbf; |
| 51128 Bearing 140x180x31mm | standards met:UL, AFBMA, AGMA, ASM; finish/coating:Black Oxide; overall length:6.2500 in; expansion type:Non-Expansion Bearin; manufacturer catalog number:123597; bore type:Round; base to bore centerline:1.5625 in; radial dynamic load capacity:4368 lb; mounting:Two-Bolt Base; locking device:Set Screw; |