| 916 Thrust Ball Bearing 80x115x29mm | D:120 mm; closure type:Open; manufacturer upc number:029176716423; d:85 mm; internal clearance:C0; B:36 mm; cage material:Phenolic; |
| UCX10-30 Insert Ball Bearing With Wide Inner Ring 47.625x100x55.6mm | Z_:17; da:111; C0:305; C:249; Oil rpm:4300; SBRG:2; LangID:1; dd min:130; dc min:122; ALPHA_:0; |
| RABRB15/47-XL-FA164 Insert Ball Bearing With Rubber Interliner 15x47.3x31.1mm | length to ball center:48 mm; housing material:Zinc-Plated Steel; d:10 mm; thread direction:Left Hand; shank thread length:28 mm; standards met:ISO-12 240-4; rod end type:Male Threaded; radial static load capacity:18500 N; shank thread size:M10; ball width:14 mm; |
| 412DTVL730 Thrust Ball Bearings 1047.75x1041.4x1260.475mm | frequency:50/60 Hz; voltage:200-240 V; bore range:20 mm to 400 mm; maximum bearing weight:264 lb; heater type:Induction; |
| 8205 Thrust Ball Bearing 25x47x15mm | locking device:Set Screw Collar; D:72 mm; bearing material:AISI 52100 Steel; bore type:Round; seal type:Contact with Slinger; outer ring width:23 mm; inner ring width:43 mm; d:30 mm; radial static load capacity:1530 kgf; radial dynamic load capacity:2730 kgf; |
| F7-15M High Speed Thrust Ball Bearing Ball Bearing F7-15M Bearing 7x15x5mm | mounting type:Two-Bolt Flange; radial dynamic load capacity:2150 lbf; length through bore:0.866 in; bore type:Round; series:UELFL200NP; d:0.7500 in; replacement bearing:UE204-12; housing material:Cast Iron - Nickel P; D:2.8125 in; B:3.5625 in; |
| BB20025 Reali-Slim Bearing Thin Section Bearing | insert material:52100 Bearing Steel; housing construction:Cast Iron; housing material:Cast Iron; bearing material:52100 Bearing Steel; compatible shaft diameter:1.3750 in; expansion type:Non-Expansion Bearin; maximum rpm:3500 rpm; series:FB250; cage material:Nylon; duty type:Standard Duty; |
| подшипники 1681/670 670×800×105mm | material:Powdered Metal SAE 8; d:3 in; standards met:RoHS, ASTM B438 Grad; maximum pv value:50000; D:4 in; material specification:SAE 841; operating temperature range:10 to 220 ºF &d; maximum p value:2000 psi; overall length:6-1/2 in; groove/plug type:None; |
| E70-KRR Insert Ball Bearing 70x125x66mm | lock plate number:PL 80; manufacturer upc number:087796153820; lock nut number:N 080; taper:1:12; series:SNP; housing size:SDAF 080; compatible bearing number:23080 CACK/W33; material / coating:Steel; d:15.0000 in; |
| STB 2 Inch Bearing Housed Unit | row type & fill slot:Single Row Non-Fill; bore type:Round; maximum rpm (grease):22000 rpm; snap ring included:Without Snap Ring; manufacturer upc number:8865590017935; B:10 mm; closure type:Two Non-Contact Shie; D:32 mm; d:0.5000 in; manufacturer catalog:Click here; |