| No. | Brand | h | a | T | e | Y | F | D | r |
| PB1009 | Nachi | - | - | - | - | - | - | 3.2500 in | - |
| Zx120 | Hitachi | - | - | - | - | - | - | 2.5625 in | - |
| 15mm | - | - | - | - | - | - | - | 100mm | - |
| 6302 | NSK | - | - | - | - | - | - | 8-1/4 in | - |
| 450 | - | - | - | - | - | - | - | - | - |
| SBS120 | - | - | - | - | - | - | - | - | - |
| (Hz-HS0552) | - | - | - | - | - | - | - | 190mm | - |
| YZ100G/H | NTN | - | - | - | - | - | - | - | - |
| A10VSO180 | - | - | - | - | - | - | - | - | - |
| MDD115D-N-020-N2L-130PB2 | Rexroth | - | - | - | - | - | - | 70 mm | - |
| 150 | - | - | - | - | - | - | - | - | - |
| 6003 | fag | - | - | - | - | - | - | - | - |
| 1] | - | - | - | - | - | - | - | - | - |
| 8mm/9mm/10mm | - | - | - | - | - | - | - | 80mm | - |
| 90 | - | - | - | - | - | - | - | - | - |
| 4*8FT | - | - | - | - | - | - | - | 5.1250 in | - |
| 305J | FAFNIR | - | - | - | - | - | - | 2-3/8 in | - |
| NU2220 | NSK | - | - | - | - | - | - | - | - |
| 6304VA | INA | - | - | - | - | - | - | 3.0300 in | - |
| R480 | - | - | - | - | - | - | - | - | - |
| 80x140x33 | - | - | - | - | - | - | - | 3.6250 in | - |
| sl014952 | - | - | - | - | - | - | - | - | - |
| SE5 | - | - | - | - | - | - | - | - | - |
| 694CE ZrO2 Full Ceramic Bearing (4x11x4mm) Deep Groove Ball Bearing | expansion type:Non-Expansion Bearin; replacement bearing:2-18C; B:5.2500 in; series:SFC; lubrication type:Lubrication Fitting; finish/coating:Uncoated; pilot diameter:3.6250 in; bolt size:0.3750 in; manufacturer catalog number:703498; seal type:Contact Seal; |
| SCJT 5/8 Inch Bearing Housed Unit | maximum pv value:50000; d:5/8 in; maximum p value:2000 psi; material specification:BOST-BRONZ; flange width:5/32 in; groove/plug type:None; standards met:MIL-B-5687C Type I C; overall length:5/8 in; operating temperature range:Maximum of +250; D:7/8 in; |
| GE90-XL-KRR-B / GE90-KRR-B Insert Ball Bearing 90x160x69.5mm | end cap type:Sealed Closed Cap; mounting:Two-Bolt Base; technical data sheet:Click here; B:2.0625 in; seal type:Single Lip Contact; manufacturer catalog:Click here; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; bore type:Round; D:3.5781 in to 4.1666; |
| SAK 2-3/16 Inch Bearing Housed Unit | Fatigue Load Rating (kN):1.32; SKU:61822-2rsr-y-fag; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):3000; Cage Type:Brass; D:140mm; B:16mm; d:110mm; Weight:0.50 KGS; Static Load Rating (kN):30.5; |
| YASM 1-15/16 Inch Bearing Housed Unit | D:90mm; B:20mm; Grease Limiting Speed (r/min):6300; Dynamic Load Rating (kN):22.8; Weight:0.02 KGS; Availability:In Stock; d:50mm; Clearance:Standard; Static Load Rating (kN):8.1; Seals or Shields:Open Type; |
| 51105 Thrust Ball Bearing 25×42×11mm | locking device:Set Screw; manufacturer upc number:662327037024; mounting type:Four-Bolt Flange; series:200; housing material:Cast Iron; d:1.6875 in; duty type:Standard Duty; seal type:Clearance/Non-C; |
| 51326 MP Bearing 130x225x75mm | Clearance:Standard; D:37mm; B:12mm; Availability:In Stock; SKU:1301etn9-qbl; Seals or Shields:Open Type; Cage Type:Plastic; d:12mm; Weight:0.02 KGS; |
| 6010zz Deep Groove Ball Bearing | closure type:Open; flanges:(2) Outer; cage material:Brass; ring separation:Separable Outer Ring; finish/coating:Uncoated; operating temperature range:-30 to +150 &de; maximum rpm:10200 RPM; fillet radius:1 mm; B:23 mm; number of rows:1; |
| KGX075 Super Thin Section Ball Bearing 190.5x241.3x25.4mm | Cage Type:Steel; d:25mm; Seals or Shields:Open Type; Oil Limiting Speed (r/min):9000; Clearance:Standard; B:18.25mm; Availability:In Stock; Static Load Rating (kN):46.9; Dynamic Load Rating (kN):60.3; Weight:0.02 KGS; |
| KFC250 Super Thin Section Ball Bearing 635x673.1x19.05mm | radial dynamic load capacity:38200 lb; flange mounting type:Four-Bolt Square; overall height:6-7/16 in; standards met:ANSI/ABMA STD 9; lubrication type:Lubrication Fitting; D:5.0313 in; locking device:Double Concentric Co; B:6.4375 in; expansion type:Non-Expansion Bearin; end type:Closed; |
52207 Bearing 35x62x34mm Video
Parker PGP511 Pumps Shipped Worldwide | Hydraulics Online
Parker PGP511 pumps are fixed displacement, aluminium gear pumps offering high performance and high power density. These pumps were formerly made by
Gear Pumps / Motors - Parker Hannifin
PGP511/517/620/625//640 ... To the extent that Parker or its subsidiaries or authorized distributors provide ... 517 - 13 tooth gear profile, PGP 511 - 12 tooth
Parker PGP511 Series Gear Pump 3349111978 ... - Maxodeals
Parker PGP511 Series Gear Pump 3349111978 798126921000 NMP Ser. No: 33/10 18852404 / 001
Parker Pump Gear PGP-PGM - Fluid Power Solutions
tooth gear profile, PGP 511 - 12 tooth gear profile and optimized flow metering provide reduced pressure pulsation and exceptionally quiet operation (PGP511
Aluminum Pumps – PGP511 Series | Parker NA
Parker's Aluminum Pump PGP511 Series fixed displacement gear pump offers high performance and high power density due to its aluminum construction
PGP/PGM 500 Series - RS Components
This document and other information from Parker Hannifin Corporation, its subsidiaries and ... List of Available Pump Combinations - PGP 505 and PGP 511
parker motor pgm511a0190ad2**xd4d4**/pgp511 3349220012
PARKER MOTOR PGM511A0190AD2**XD4D4**/PGP511 3349220012 ... They are produced in four frame sizes (PGP 502 PGP 505 PGP 511 PGP 517) with
Parker PGP511 Series Pump | GS Global Resources
The Parker PGP511 Series fixed displacement gear pumps offer cost effective, high power density due to their aluminum construction. (6.0 - 31.0 cc/rev)
PGP 500 Series zp20 PGM 500 Series
This document and other information from Parker Hannifin Corporation, ... The Parker Hannifin ... Load-Sense Pressure-Relief Valve - PGP 511 and PGP 517
Aluminum Pumps - Series PGP511 | Parker NA
Parker's Aluminum Pump PGP511 Series fixed displacement gear pump offers high performance and high power density due to its aluminum construction