| GAY15-XL-NPP-B Radial Insert Ball Bearing 15x40x22mm | d:3.7500 in; D:5.7500 in; bearing material:Steel; assembly type:TS Assembly; closure type:Open; manufacturer upc number:053893307084; |
| SS1312 Bearing | Z_:16; D_a:56; SBRG:10; Prod_Type3:ACBB_SR_MM_DT; DA_:7.938; m0:0.322; ra:1; GRS rpm:7500; SRIX:0.04; SRE:4.13; |
| GY1215-KRR-B-AS2/V Inch Radial Insert Ball Bearing 74.613x130x77.8mm | D:1-11/16 in; manufacturer upc number:717905063626; groove/plug type:None; overall length:2 in; material specification:SAE 660 (C932&#; maximum v value:750 fp/min; manufacturer catalog:Click here; standards met:83-7-7-3, ASTM B505,; maximum pv value:75000; maximum p value:4000 psi; |
| ER212-36 / ER 212-36 Insert Ball Bearing With Snap Ring 57.15x110x65.1mm | bearing material:Bearing Steel; expansion type:Non-Expansion Bearin; series:QVVPX; finish/coating:Powder Coat; bolt size:0.8750 in; B:5.1300 in; base height:1.6300 in; overall length:16.7500 in; overall height:9.4400 in; housing construction:Solid Pillow Block; |
| SS51324 Bearing | rod end type:Male Threaded with M; length to ball center:1.9380 in; misalignment angle:22 °; head diameter:1.0000 in; ball material:Alloy Steel - heat t; d:0.3750 in; housing material:Carbon Steel - Corro; series:CM; shank thread size:3/8-24; shank thread length:1.2500 in; |
| KA100AR0 Thin Section Ball Bearing | housing material:Cast Iron; finish/coating:Uncoated; base to bore centerline:4-1/2 in; expansion type:Non-Expansion Bearin; operating temperature range:+250 to +1; base width:3-7/16 in; B:4-1/2 in; manufacturer catalog number:033505; series:1000; lubrication type:Self Lubricating; |
| 65 mm x 140 mm x 33 mm GN107KRRB + COL Ball Bearing Housed Unit | C0:113; mass:1.18; hidTable:ecat_NSCLDR; ALPHA_:0; db min:59; B_:27; da:59; rb:2; SBRG:3; D_:110; Size (mm):65 mm x 140 mm x 33 mm ; |
| ER210-30 / ER 210-30 Insert Ball Bearing With Snap Ring 47.625x90x51.6mm | typical application:Exceptional Bearing; width:0.7500 in; Weight:0.169 lb; lip material:Labyrinth; harmonization code:3926904590.US; construction description:ISO-GARD® Flange; pressure tolerance:Ambient; maximum shaft surface speed:4500 fpm; manufacturer catalog number:29502-5713; shaft diameter:1.9375 in; |
| KC110CP0 Thin Section Bearing 279.4x298.45x9.53mm | finish/coating:Uncoated; operating temperature range:Maximum of +250; hanger unit type:Conveyor Hanger Unit; series:S; locking device:None; d:2 in; bearing material:Moly-Filled Nylon; bearing style:220; manufacturer product page:Click here; |
| RABRB30/72-FA107 Insert Ball Bearing With Rubber Interliner 30x72.2x38.2mm | lock nut number:AN20; compatible bearing number:22222; lock washer number:W20; series:222K; overall length:65 mm; lock nut outside diameter:158.75 mm; d:100 mm; includes:Sleeve (SK-1102; |