| 952 Thrust Ball Bearing 260x375x90mm | manufacturer upc number:053893016061; compatible cup:362, 362A, 362AB, 36; bearing material:Chrome Steel; series:365; operating temperature range:-65 to +250 &de; dynamic load capacity:22900 lbf, 39900 lbf; finish/coating:Uncoated; cone width:0.8750 in; static load capacity:21500 lbf; d:2.0000 in; |
| 5214K Angular Contact Ball Bearing 70x125x39.67mm | operating temperature range:Max 350°; grade:Commercial; housing material:Carbon Steel - corro; manufacturer catalog number:1491009000; shank thread size:5/8-18; axial static load capacity:1000 lb; length to ball center:2.5000 in; radial static load capacity:10000 lb; shank thread length:1.3440 in; ball width:.7500 in; |
| L10WA700 Thin Section Bearing 177.8x228.6x25.4mm | mounting:Two-Bolt Base; series:200; manufacturer upc number:662864807340; lubrication type:Lubrication Fitting; d:3.1875 in; overall height:7.8750 in; maximum operating temperature:225 °F; base to bore centerline:4.0000 in; bore type:Round; seal type:Contact/Lip; |
| Full Si3N4 ZrO2 Ceramic Ball Bearing 8x22x7mm | lock nut type:For Lock Washer; Mass lock nut:2.8 kg; Associated spanner:TMFN 30-40; lock washer or locking device part number:MB36T; series:KM; thread size:M180x3 mm; b:18 mm; B:27 mm; G:M 180x3; material:Steel; |
| KAA10CL0 Thin Section Bearing 25.4x34.925x4.763mm | head diameter:3/4 in; d:0.2500 in; race material:Bronze; housing material:Steel; shank thread length:3/4 in; grade:Commercial/Indu; operating temperature range:-30 to +300 &de; radial static load capacity:2300 lb; shank thread size:1/4-28 in; thread direction:Right Hand; |
| KG075CP0/KRG075/CSCG075 High Precision Thin Section Ball Bearing Robotic Arm Use | Fatigue Load Rating (kN):1.12; d:75mm; Clearance:Standard; B:31mm; Cage Type:Plastic; Reference Speed Rating (r/min):9000; Dynamic Load Rating (kN):58.5; Limiting Speed Rating (r/min):6300; Seals or Shields:Open Type; Static Load Rating (kN):22; |
| 511/710 F Bearing 710x850x112mm | lubrication type:Lubrication Fitting; overall height:114.3 mm; rod hole diameter:28.6 mm; overall length:144.5 mm; series:MUCNST200NP; dynamic load capacity:3080 kgf; housing material:Cast Iron - Nickel P; seal type:Contact with Slinger; d:50 mm; slot spacing:84.1 mm; |
| NBC22825 Thin Section Bearing 228.6x279.4x25.4mm | material:Chrome Steel; minimum radius:0.0800 in; d:1.9375 in; width:1.7600 in; closure type:Open; type of needle bearing:Separable Inner Ring; compatible bearing:GR RS, GR RSS, GR S,; manufacturer catalog number:0003100000; lubrication hole type:Lubrication Hole; standards met:MS 51962-26; |
| NBC16525 Thin Section Bearing 165.1x215.9x25.4mm | D:2-1/4 in; maximum v value:750 fp/min; standards met:83-7-7-3, ASTM B505,; material specification:SAE 660 (C932&#; d:3/4 in; maximum pv value:75000; groove/plug type:None; operating temperature range:-450 to 500 ºF; maximum p value:4000 psi; overall length:13 in; |
| 5202K Angular Contact Ball Bearing 15x35x15.88mm | housing width:1.5625 in; B:7.0625 in; duty type:Standard Duty; finish/coating:Uncoated; locking device:Set Screw; housing material:Cast Iron; bearing material:52444 Steel/Bla; lubrication type:Lubrication Fitting; replacement bearing:2-112 XLO; length through bore:1.9375 in; |