| RABRB40/85 Insert Ball Bearing With Rubber Interliner 40x85x46.3mm | radial static load capacity:2530 lb; outer ring width:0.7087 in; inner ring width:1.4063 in; operating temperature range:-40 to +225 &de; d:1.1875 in; D:2.4409 in; seal type:Contact/Lip; locking device:Eccentric Collar; bearing material:Chrome Steel; finish/coating:Uncoated; |
| RTU 2-1/4 Inch Bearing Housed Unit | duplex type:Universal Flush Grou; contact angle:15 °; closure type:Open; D:80 mm; d:40 mm; B:36 mm; |
| L10RA208 Thin Section Bearing 63.5x79.375x7.94mm | static load capacity:1750 lbf; fillet radius:1 mm; bore type:Round; internal clearance:C0; d:20 mm; B:15 mm; closure type:Open; maximum rpm:16000 RPM; dynamic load capacity:3570 lbf; D:52 mm; |
| SS51322 Bearing | series:NF; standards met:SAEJ1120; operating temperature range:-40 to +275 &de; length to ball center:1.062 in; head diameter:* 0.625; grade:Commercial; rod end type:Female Threaded; head width:0.250 in; shank thread length:0.562 in; radial static load capacity:1210 lbs; |
| KBA045 Super Thin Section Ball Bearing 114.3x130.175x7.938mm | d:2-15/16 in; housing width:3-7/16 in; radial dynamic load capacity:82000 lb; D:6-3/4 in; series:9000; housing material:Cast Iron; bearing type:Spherical Roller; seal type:Contact/Lip; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; |
| 51172M Thrust Ball Bearing | D:130mm; d:60mm; SKU:1312etn9-qbl; Seals or Shields:Open Type; Clearance:Standard; Availability:In Stock; Cage Type:Plastic; B:31mm; Weight:0.02 KGS; |
| KAK/S 3/4 Inch Bearing Housed Unit | stud diameter:0.2500 in; lubrication hole location:Head; bearing element:Needle Rollers; head type:Hex; maximum rpm:8300 rpm; roller width:0.4375 in; manufacturer catalog number:2050185000; stud length:0.7500 in; finish/coating:Black Oxide; radial static load capacity:530 lbs; |
| UCFC210-32 Pillow Block Ball Bearing FC210 Bearing Housing Units | rod end type:Male Threaded with M; housing material:Carbon Steel - corro; d:0.1900 in; head width:.2500 in; grade:Commercial; length to ball center:1.2500 in; series:TM; operating temperature range:Max 350°; thread direction:Left Hand; ball material:Alloy Steel - heat t; |
| KBC160 Super Thin Section Ball Bearing 406.4x422.275x7.938mm | D:1-5/8 in; sleeve bearing type:Plain Sleeve; d:1-3/8 in; operating temperature range:-35 °F to +; groove/plug type:None; standards met:SAE 841, CT-1000-K26; maximum p value:Static 8000 / D; overall length:2-1/2 in; maximum pv value:50000; material specification:Oilite®, Synthet; |
| BTM100B/DBAVQ496 Angular Contact Thrust Ball Bearing 100x150x45mm | Availability:In Stock; B:60mm; D:170mm; Reference Speed Rating (r/min):2900; Seals or Shields:Open Type; Limiting Speed Rating (r/min):2500; d:110mm; Dynamic Load Rating (kN):493; Cage Type:Steel; Clearance:C3; |