| 51126 Bearing 130x170x30mm | manufacturer catalog number:29507-4938; shaft diameter:1.6538 in; construction description:ISO-GARD® Small; Weight:0.117 lb; misalignment tolerance:0.020 in; maximum shaft surface speed:4500 fpm; harmonization code:3926904590.US; continuous temperature range:-22 to 400°F; lip material:Labyrinth; pressure tolerance:Ambient; |
| 25 mm x 52 mm x 15 mm UCFC202-09 Pillow Block Ball Bearing FC204 Bearing Housing Units | B:33 mm; closure type:Open; finish/coating:Uncoated; row type & fill slot:Single-Row Non-Fill; precision rating:Not Rated; series:7300WN; radial dynamic load capacity:26000 lb; fillet radius:2 mm; contact angle:40 °; cage material:Brass; Size (mm):25 mm x 52 mm x 15 mm ; |
| 52234 Thrust Ball Bearing 170x240x97mm | bolt center-to-center width:2-1/2 in; travel:18 in; base width:7-1/2 in; series:HD; manufacturer catalog number:089021; rod diameter:1 in; frame type:Two-Piece Saddle Mou; D:35 in; overall height:5-1/4 in; overall length:37 in; |
| SS1304 Bearing | D:13-1/4 in; compatible bearing type:Spherical Roller; B:7.1250 in; housing material:Cast Iron; base width:4-3/4 in; series:SAF; mounting:Four-Bolt Base; compatible bore diameter:3.4375 in; inside diameter:3.4375 in; overall height:10.4375 in; |
| KCX050 Super Thin Section Ball Bearing 127x146.05x9.525mm | unit type:Side Mount; rod hole diameter:1.3750 in; replacement bearing:2-2T; finish/coating:uncoated; operating temperature range:250°; slot width:1.0625 in; locking device:Skwezloc Concentric; housing material:Cast Iron; overall length:6.7500 in; B:2.2500 in; |
| LBE25 Linear Ball Bearing 25x40x58mm | d:60 mm; radial static load capacity:42.5 kN; cage material:Phenolic Resin; series:200; outer ring width:22 mm; D:110 mm; ball screw application:Not for Ball Screws; contact angle:25 °; closure type:Single Seal; fillet radius:1.5 mm; |
| KAC090 Super Thin Section Ball Bearing 228.6x241.3x6.35mm | Reference Speed Rating (r/min):--; Availability:In Stock; Dynamic Load Rating (kN):7.65; Static Load Rating (kN):3.75; Cage Type:Steel; Seals or Shields:Open Type; d:15mm; Weight:0.02 KGS; Fatigue Load Rating (kN):--; Limiting Speed Rating (r/min):20000; |
| FK10 Ball Screw Support Bearing 10x27x10mm | outer ring width:17 mm; precision rating:Not Rated; cage material:Brass; closure type:Open; series:NJ3; d:25 mm; flanges:(2) Outer; maximum rpm:14400 RPM; operating temperature range:-30 to +150 &de; B:17 mm; |
| 52205 Bearing 25x47x28mm | material:Cast Bronze; d:3 in; groove/plug type:None; material specification:SAE 660 (C932&#; maximum v value:750 fp/min; operating temperature range:-450 to +500 &d; maximum p value:4000 psi; overall length:13 in; maximum pv value:75000; standards met:83-7-7-3, ASTM B505,; |
| KC080AR0 Thin Section Ball Bearing | length to ball center:1.8750 in; ball material:440 C Stainless Stee; overall height:2.3125 in; radial static load capacity:5929 lbf; housing material:17-4 PH Stainless St; manufacturer catalog:www.aurorabearing.co; head width:0.3440 in; harmonization code:8483.30.8055; rod end type:Male Threaded; thread type:UNF-3A; |