| 6813CE ZrO2 Full Ceramic Bearing (65x85x10mm) Deep Groove Ball Bearing | manufacturer product page:Click here; manufacturer upc number:4547359590975; standards met:ANSI; cone width:2.2500 in; dynamic load capacity:109000 lbf; operating temperature range:-40 to 250 ºF; finish/coating:Uncoated; static load capacity:187000 lbf; bearing material:Case Carburized Stee; inner ring width:2.2500 in; |
| NBC50825 Thin Section Bearing 508x558.8x25.4mm | maximum rpm:3300 RPM; outer ring width:0.4063 in; d:40 mm; bore type:Round; seal type:Felt; series:ER; D:3.1496 in; operating temperature range:-20 to +180 &de; radial dynamic load capacity:7340 lb; radial static load capacity:4467 lb; |
| SAA206FP7 Insert Ball Bearing With Eccentric Collar Lock 30x62x35.7mm | lock nut outside diameter:120 mm; compatible bearing number:23218; d:80 mm; overall length:86 mm; lock nut number:KM18; material / coating:Steel; includes:Lock Washer (MB; thread size:M90x2; lock washer number:MB18; taper:1:12; |
| 39345001 Reali-Slim Bearing Thin Section Bearing | manufacturer catalog number:29602-5743; width:0.7000 in; pressure tolerance:Ambient; lip material:Labyrinth; maximum shaft surface speed:12000 fpm; continuous temperature range:-22 to 400°F; Weight:1.3 lbs; D:2.7500 in; typical application:Exceptional Bearing; harmonization code:8487900040.US; |
| CSEB020 Thin Section Ball Bearing 50.8x66.675x7.938mm | D:1 in; overall length:1-1/2 in; groove/plug type:None; maximum p value:Static 8000 / D; d:5/8 in; material specification:Oilite®, Synthet; maximum pv value:50000; bearing material:Oil-Impregnated Bron; manufacturer catalog:Click here; sleeve bearing type:Flanged Bearing; |
| UCX10 Insert Ball Bearing With Wide Inner Ring 50x100x55.6mm | end cap type:Closed End Cap; compatible housed unit:515, 517, 516; compatible bore diameter:3 in, 2-11/16 i; material:Steel; |
| KDC040 Super Thin Section Ball Bearing 101.6x127x12.7mm | bolt size:1/2 in; overall length:4.2500 in; base width:1.8906 in; seal type:FDA approved Silicon; duty type:Normal Duty; d:1.2500 in; base to bore centerline:1.8750 in; housing material:Stainless Steel; mounting:Tapped Base; locking device:Set Screw; |
| CSCG140 High Precision Thin Section Ball Bearing Robotic Arm Use | Weight:0.67 lbs; shank thread size:3/4-16; head diameter:1.7750 in; d:0.7500 in; thread type:UNJF-3B; radial static load capacity:29300 lbf; head width:0.6400 in; length to ball center:2.8750 in; overall height:3.7630 in; lubrication type:Self-Lubricating; |
| 53338U Thrust Ball Bearing 190x320x121mm | d:1.4375 in; B:1.4 in; housing material:Cast Iron; radial static load capacity:3461 lb; series:207; duty type:Light Duty; bore type:Round; manufacturer catalog number:128110; finish/coating:Black Oxide; seal type:Contact/Lip; |
| TTU 1-1/4 Inch Bearing Housed Unit | inner ring width:60 mm; bearing type:Radial; misalignment angle:5 °; closure type:Open; radial static load capacity:2520 kN; inner ring material:Chrome Steel; d:90 mm; outer ring width:50 mm; operating temperature range:-60 to +500 &de; D:130 mm; |