| CSCG050 Thin Section Bearing 127x177.8x25.4mm | unit type:Side Mount; d:1.5000 in; expansion type:Non-Expansion Bearin; overall height:120.7 mm; B:1-15/16 in; overall length:143 mm; finish/coating:Uncoated; slot spacing:101.98 mm; series:209; lubrication type:Lubrication Fitting; |
| 6201-1/2 〃Inch Bore Bearing | finish/coating:Uncoated; overall height:260.70 mm; locking device:Adapter Mount; mounting:Two-Bolt Base; expansion type:Non-Expansion Bearin; manufacturer catalog number:071014; overall length:410 mm; bearing type:Spherical Roller; lubrication type:Lubrication Fitting; replacement bearing:22222; |
| 1726214-2RS Insert Bearing / Deep Groove Ball Bearing 70x125x24mm | operating temperature range:120° to 248°; static load capacity:4786 lbs; finish/coating:Uncoated; cage material:Carbon Steel; series:6200; snap ring included:Without Snap Ring; D:40 mm; dynamic load capacity:9577; bore type:Round; maximum rpm:20000 RPM; |
| CSXC040 Thin Section Ball Bearing 101.6x120.65x9.525mm | thread type:UNJF-3B; race material:PTFE; finish/coating:Cadmium; shank thread size:5/16-24 in; standards met:SAE AS6039, MIL-PRF-; overall height:1.7655 in; thread direction:Right Hand; shank thread length:.7500 in; housing material:52100 Bearing Qualit; axial static load capacity:2920 lbf; |
| KFX065 Super Thin Section Ball Bearing 165.1x203.2x19.05mm | D:125mm; Static Load Rating (kN):264; d:85mm; Clearance:Standard; B:31mm; Dynamic Load Rating (kN):96; Availability:In Stock; Oil Limiting Speed (r/min):2400; Weight:1.22 KGS; SKU:51217-nsk; |
| SAA208-24FP7 Insert Ball Bearing With Eccentric Collar Lock 38.1x80x43.7mm | manufacturer catalog number:5516; bore type:Round; closure type:Open; snap ring included:Without Snap Ring; B:0.2500 in; d:0.5000 in; D:1.1250 in; |
| RABRB40/85-FA101 Insert Ball Bearing With Rubber Interliner 40x85x46.3mm | radial static load capacity:20000 lb; closure type:Open; stud diameter:1.2500 in; roller width:2.0000 in; eccentric stud diameter:1-3/4 in; stud length:2.5000 in; lubrication hole location:None; width to groove center:1 in; v-groove angle:90 °; roller material:Stainless Steel; |
| GN211KRRB + COL Ball Bearing Housed Unit | lip material:Labyrinth; typical application:Exceptional Bearing; Weight:0.836 lb; D:2.5590 in; misalignment tolerance:0.010 in; maximum shaft surface speed:12000 fpm; shaft diameter:1.7719 in; harmonization code:3926904590.US; pressure tolerance:Ambient; width:0.6250 in; |
| KD110CP0 Thin Section Bearing 279.4x304.8x12.7mm | housing material:Cast Iron; expansion type:Non-Expansion Bearin; lubrication type:Lubrication Fitting; mounting:Two-Bolt Base; B:2-7/32 in; overall length:7.2500 in; maximum rpm:4000 RPM; series:200; d:1.6875 in; base width:2 in; |
| R168ZZ Miniature Ball Bearing For Power Tool | inner ring width:1.7500 in; radial static load capacity:1651 lb; D:2.0472 in; seal type:Single Lip Contact; manufacturer catalog number:767360; outer ring width:0.5938 in; d:1.0000 in; maximum rpm:5500 RPM; locking device:Eccentric Collar; series:VE 200; |