| C3052 CARB Toroidal Roller Bearing 260x400x104mm | Recommended tightening torque for set screw:8 Nm; s1:21.75 mm; L:143 mm; B:43.5 mm; Designation of bearing:US210-31G2T20; T min.:-20 °C; J:111 mm; Z:37.5 mm; G:R1/8"; Designation of housing:FE210N-; |
| C-4036V CARB Toroidal Roller Bearing 180x280x100mm | D:130 mm; G:7/16-20UNF; T min.:-40 °C; T max.:100 °C; S:33.3 mm; B:77.8 mm; C1:9 mm; m:12 mm; C:30 mm; C0:49.5 kN; |
| C4122K30V Toroidal Roller Bearing 110x180x69mm | L1:22 mm; H2:62 mm; T min.:-20 °C; Z:17 mm; Designation of housing:PA204N-; Recommended tightening torque for set screw:5.5 Nm; C0:6.65 kN; A:40 mm; s1:15.5 mm; E:13 mm; |
| C30/710KM CARB Toroidal Roller Bearing 710*1030*236mm | Category:Cylindrical Roller B; ra max:2 mm; Max operating temperature, Tmax:120 °C; Weight / Kilogram:2.32; Bore:2.559 Inch | 65 Mill; Width:1.299 Inch | 33 Mill; Characteristic outer ring frequency, BPF0:4.89 Hz; Dc max:120 mm; Fatigue limit load, Cu:16.8 kN; Separable:Outer Ring - Both Si; |
| C 3144 CARB Toroidal Roller Bearing 220x370x120mm | L3:150 mm; A:90 mm; A5:37.3 mm; SW:7.94 mm; C:113.36 kN; T min.:-20 °C; Designation of bearing:EX315-47G2; L:262 mm; G:M10x1; T max.:100 °C; |
| C3980KMB CARB Toroidal Roller Bearing 400x540x106mm | J:190 mm; Weight:4.5 kg; s1:26.85 mm; T min.:-20 °C; Designation of housing:PE212N-; L:240 mm; d:57.15 mm; H:69.9 mm; G:R1/8"; C:52.5 kN; |
| C3064KM Bearing 320x480x121mm | Designation of bearing:ES202G2T20; S:6.5 mm; G:M6x1; Designation of housing:FL203N-; B:19.1 mm; J:76.5 mm; L:57 mm; Z:43.5 mm; A:25.5 mm; Dz:46 mm; |
| C 3040 Bearing 200x310x82mm | Weight:6.82 kg; C:62 kN; C0:45 kN; Designation of bearing:UC214-43G2L3; B:74.6 mm; A1:26 mm; T min.:-20 °C; L:224 mm; Designation of housing:T214-; N1:32 mm; |
| C4034-2CS5V Seal Carb Toroidal Roller Bearings 170*260*90mm | Designation of open end cover:SCOU205-14; Designation of bearing:US205-14G2T20; SW:3.18 mm; L1:225 mm; Designation of housing:SP203-205/52N-; T max.:200 °C; A:21 mm; L:264 mm; Recommended tightening torque for set screw:3.7 Nm; H:78 mm; |
| C 31/710 MB Bearing 710x1150x345mm | Characteristic outer ring frequency, BPF0:8.63 Hz; B:86 mm; Da min:255 mm; a:75 mm; Db min:297 mm; da max:194 mm; Da max:292 mm; Cb min:20 mm; r1a max:3 mm; Characteristic rolling element frequency, BSF:6.9 Hz; |