| C 2314 K + H 2314 Bearing | Housing Material:Cast Iron; Grease Type:Unirex N2; Expansion Type:Non-Expansion; Seal Type:Single Lip; End Cap Groove:No; Self Aligning:Self Centering; Bearing Outer Ring Material:Steel; Brand:Baldor-Dodge; Bearing Locking Device:Setscrew; Housing Coating:Powder Coat; |
| C 2215 KV + H 315 CARB Toroidal Roller Bearings 65x130x31mm | Nlim (grease):0 rpm; C0r:0 kN; Fw:48 mm; rs min:0 mm; Brand:NTN; Min operating temperature, Tmin:-20 °C; Precision class:P0; D:78 mm; Max operating temperature, Tmax:120 °C; C:36 mm; |
| C-2230 CARB Toroidal Roller Bearing 150x270x73mm | Dynamic load, C:3.35 kN; d:7 mm; B:7 mm; Max operating temperature, Tmax:120 °C; Nlim (grease):32,000 rpm; f0:12.5; Min operating temperature, Tmin:-25 °C; Fatigue limit load, Cu:0.06 kN; Static load, C0:1.4 kN; D:22 mm; |
| C2224K C3224K Toroidal Roller Bearings | Z:91.3 mm; G:M6x1; Designation of open end cover:SCOU212-39; Designation of housing:PG212N-; T max.:200 °C; T min.:-20 °C; Designation of bearing:US212-39G2T20; Recommended tightening torque for set screw:16.8 Nm; L1:50 mm; H2:138 mm; |
| C-5911V CARB Cylindrical Roller Bearing For Electric Motors 55x80x34mm | C:22 kN; J:130 mm; d:31.75 mm; Designation of bearing:MUC207-20FD; N:13mm; e:18 mm; Weight:0.48 kg; A2:43.4 mm; A:32.8 mm; S:17.5 mm; |
| C-5911V CARB Cylindrical Roller Bearing 55x80x34mm | Mass (without HJ ring):3.48 kg; r1s min:2.1 mm; F:119 mm; Fatigue limit load, Cu:33.9 kN; d:100 mm; Characteristic cage frequency, FTF:0.42 Hz; Characteristic rolling element frequency, BSF:6.25 Hz; Nref:3,500 rpm; r1a max:2 mm; Da max:169 mm; |
| C4013-2CS5V Seal Carb Toroidal Roller Bearings 65*100*35mm | B:48 mm; Weight:2.6 kg; N:17mm; C:33.5 kN; d:36.51 mm; T max.:100 °C; H1:20 mm; Recommended tightening torque for set screw:8 Nm; N1:25 mm; G:M6x1; |
| C 3140 CARB Toroidal Roller Bearing 200x340x109mm | Z:16.5 mm; Weight:0.57 kg; H:33.3 mm; A:36.5 mm; d:25 mm; C0:7.8 kN; B:15 mm; s1:16.7 mm; T max.:100 °C; C:13.6 kN; |
| C 2206 TN9 CARB Toroidal Roller Bearing 30x62x20mm | C:12.8 kN; T min.:-40 °C; A:25.5 mm; N:12mm; A1:11 mm; A2:41.5 mm; T max.:100 °C; Designation of housing:FL204-; e:15 mm; Recommended tightening torque for set screw:3.7 Nm; |
| C 3156 K + OH 3156 HTL CARB Toroidal Roller Bearings 260x460x146mm | J:78 mm; A1:12 mm; H:102 mm; s1:23.05 mm; B:19.1 mm; d1:27.2 mm; N:10mm; S:6.5 mm; Designation of bearing:ES203G2T20; J1:40 mm; |