| C 31/800 MB Bearing 800x1280x375mm | Designation of closed end cover:SCC205; H:36.5 mm; J:56 mm; Z:48 mm; C0:7.88 kN; Dz:60 mm; T min.:-40 °C; B:34 mm; H2:72 mm; G:M6x1; |
| C31/560KMB CARB Toroidal Roller Bearing 560*920*280mm | Characteristic inner ring frequency, BPFI:8.44 Hz; D:115 mm; Dynamic load, C:38.4 kN; rs min:1.1 mm; Mass:0.64 kg; B:20 mm; Nlim:3,400 rpm; d:75 mm; Characteristic rolling element frequency, BSF:7.85 Hz; d1:83.5 mm; |
| C 4032-2CS5V/GEM9 CARB Toroidal Roller Bearing 160x240x80mm | S:33 mm; A:90 mm; H1:35 mm; N:27mm; d:68.26 mm; L:360 mm; C0:68 kN; J:280 mm; Weight:13 kg; N1:40 mm; |
| C 30/750 MB Bearing 750x1090x250mm | G:M6x1; s1:15.5 mm; T min.:-20 °C; J:95 mm; H:70 mm; Recommended tightening torque for set screw:3.7 Nm; Z:44.6 mm; H2:101 mm; T max.:100 °C; L:127 mm; |
| C 4909K30V CARB Toroidal Roller Bearing 45x68x22mm | H:114 mm; L:144 mm; H2:83 mm; A:49 mm; Dz:88 mm; A1:16 mm; H1:102 mm; T min.:-20 °C; C0:18.2 kN; N2:49 mm; |
| C 2214 KV + H 314 CARB Toroidal Roller Bearings 60x125x31mm | Recommended tightening torque for set screw:8 Nm; d:41.28 mm; N:19mm; L:108 mm; Dz:95 mm; Designation of open end cover:SCOU209-26; S:19 mm; A:38 mm; T min.:-40 °C; Designation of housing:FL209N-; |
| C 3136 K + H 3136 L CARB Toroidal Roller Bearings 160x300x96mm | Weight:0.75 kg; Designation of housing:PA204N-; C0:6.65 kN; J:52 mm; d1:32.4 mm; s1:30.5 mm; Dz:54 mm; A1:22 mm; H1:11 mm; Designation of open end cover:SCOE204-15; |
| C 39/800 MB Bearing 800x1060x195mm | D:340 mm; Mass (without HJ ring):21.3 kg; rs min:4 mm; Category:Bearings; Manufacturer Name:NTN; Product Group:B04144; Characteristic outer ring frequency, BPF0:8.28 Hz; db min:234 mm; Characteristic rolling element frequency, BSF:7.67 Hz; Nlim (oil):2,200 rpm; |
| C3180MB CARB Toroidal Roller Bearing 400*540*200mm | N1:21 mm; L:165 mm; C:19.5 kN; H1:18 mm; Designation of housing:P206-; Weight:1.42 kg; T min.:-20 °C; Recommended tightening torque for set screw:5.5 Nm; C0:11.2 kN; H2:83 mm; |
| C3088MB CARB Toroidal Roller Bearing 440*650*150mm | r1s min:0.3 mm; Precision class:P4S; d2:40.2 mm; Nlim (grease):30,000 rpm; Nlim (oil):43,000 rpm; r1a max:0.3 mm; Db max:50.5 mm; d:35 mm; Fatigue limit load, Cu:0.18 kN; D6:43 mm; |