| C 4032 K30V CARB Toroidal Roller Bearing 160x240x80mm | C0:6.65 kN; Z:26.5 mm; N:11,5mm; C:12.8 kN; Weight:0.67 kg; S:12.7 mm; e:19 mm; G:R1/8"; A2:37.3 mm; d:20 mm; |
| C 2207V CARB Toroidal Roller Bearing 35x72x23mm | SW:3.18 mm; T max.:100 °C; Weight:0.82 kg; A1:12 mm; H2:51 mm; L3:51 mm; B:31 mm; Designation of bearing:SUC204-12; H:89 mm; Dz:54 mm; |
| C31/710MB CARB Toroidal Roller Bearing 710*1150*345mm | e:9.5 mm; C:14 kN; N:9mm; L:115 mm; Recommended tightening torque for set screw:3.7 Nm; d1:37.4 mm; s1:24.2 mm; A4:20.5 mm; G:R1/8"; d:23.81 mm; |
| C 3080 KM + OH 3080 H CARB Toroidal Roller Bearings 380x600x148mm | Fatigue limit load, Cu:0.24 kN; Characteristic outer ring frequency, BPF0:3.05 Hz; da max:21.1 mm; ra max:0.6 mm; Da max:31 mm; D1:30.5 mm; Dynamic load, C:7.7 kN; Characteristic inner ring frequency, BPFI:4.95 Hz; d:15 mm; D:35 mm; |
| C3048k CARB Toroidal Roller Bearing 240x360x92mm | H1:24 mm; A1:45 mm; G:M6x1; B:57 mm; H:67 mm; N:20mm; L1:65 mm; H2:129 mm; S:22 mm; s1:28.5 mm; |
| C4912K30V Toroidal Roller Bearings CARB C5912V C6912 | J:70 mm; S:14.3 mm; L:95 mm; A1:11 mm; Recommended tightening torque for set screw:5.5 Nm; C0:7.88 kN; N:11,5mm; Weight:0.81 kg; T min.:-20 °C; G:R1/8"; |
| C 2244 CARB Toroidal Roller Bearing 220x400x108mm | Min operating temperature, Tmin:-20 °C; Dynamic load, C:107 kN; Mass (without HJ ring):1.05 kg; Fatigue limit load, Cu:14.5 kN; Max operating temperature, Tmax:120 °C; Characteristic rolling element frequency, BSF:6.07 Hz; B:23 mm; E:108.5 mm; Brand:SNR; r1a max:1.5 mm; |
| C2217KV C2317 C2317K Toroidal Roller Bearings | S:11 mm; d1:62 mm; L:108 mm; A1:16 mm; A:38 mm; B:30.2 mm; C0:20.8 kN; J:148 mm; C:31.85 kN; N:19mm; |
| C 3172 KM + OH 3172 H CARB Toroidal Roller Bearings 340x600x192mm | Weight / Kilogram:0.126; dynamic load capacity:14000 N; Other Features:Single Row | Deep Gr; Weight / LBS:0.278; Outside Diameter:2.047 Inch | 52 Mill; f0:13.9; Width:0.591 Inch | 15 Mill; B:15 mm; Mass:0.13 kg; Nlim (oil):15,000 rpm; |
| C 39/630 M Bearing 630x850x165mm | Brand:NTN; Max operating temperature, Tmax:165 °C; f0:12.8; da max:23 mm; D:40 mm; Characteristic outer ring frequency, BPF0:2.63 Hz; d:17 mm; Static load, C0:4.6 kN; Characteristic rolling element frequency, BSF:3.78 Hz; B:12 mm; |