No. | Brand | N | g | L | H | J | f | a | C |
6006.2RSR.C3.L38 | fag | - | - | - | - | - | - | - | - |
326 | - | - | - | - | 155.6 mm | 127 mm | - | - | - |
#MG-02B-03-50-T | DAIKIN | - | - | - | 42.9 mm | - | - | - | 19.5 kN |
100cbm | - | 23mm | - | - | - | 132 mm | - | - | - |
6009ZZN | - | - | - | - | - | - | - | - | - |
PC200-6 | - | 16mm | - | 130 mm | 219 mm | - | - | - | - |
2] | - | - | - | - | - | - | - | - | - |
JBU1365 | TRW | 12mm | - | - | - | - | - | - | - |
JM207049A | Timken | - | - | 61 mm | 112 mm | 90 mm | - | - | - |
209WD | FAFNIR | - | - | - | - | - | - | - | - |
220g | - | - | - | - | - | - | - | - | 43.55 kN |
190g | - | - | - | - | - | - | - | - | - |
2x | - | 16mm | - | - | - | 80 mm | - | - | - |
DU50900040/38.9 | NTN | - | - | 144 mm | 114 mm | - | - | - | - |
6201-2RS | - | - | - | - | - | - | - | - | - |
37 | - | - | - | 139 mm | - | - | - | - | - |
10pcs | - | - | - | - | - | - | - | - | - |
SD3000 | - | - | - | - | - | - | - | - | 17 mm |
800 | - | - | - | - | - | - | - | - | - |
50% | - | - | - | 274 mm | - | - | - | - | - |
4026222 | - | M14 | - | 94 mm | 42.9 mm | 66 mm | - | - | - |
22214CCK/C3W33 | SKF | - | - | - | - | - | - | - | - |
55 | - | - | - | - | 65 mm | - | - | - | 9.55 kN |
7318 | - | - | - | - | 144 mm | 117 mm | - | - | - |
1623-DS | RBC | - | - | - | - | - | - | - | - |
61 | - | - | - | - | - | - | - | - | 25.7 kN |
4X8 | - | - | - | - | - | - | - | - | - |
12mm/15mm/18mm | - | - | - | - | - | 202 mm | - | - | - |
ZX120 | - | - | - | 143 mm | - | 111 mm | - | - | - |
16UUR | IKO | - | - | 262 mm | - | - | - | - | 113.36 kN |
C30/850KMB CARB Toroidal Roller Bearing 850*1220*272mm | ra max:0.6 mm; Mass:0.15 kg; Nlim (grease):3,400 rpm; Characteristic inner ring frequency, BPFI:14.33 Hz; Da max:96 mm; Static load, C0:13.3 kN; d:80 mm; D:100 mm; Characteristic rolling element frequency, BSF:16.14 Hz; Characteristic outer ring frequency, BPF0:12.67 Hz; |
C3044K/HA3C C3044VK C4044K30V Toroidal Roller Bearings | Characteristic inner ring frequency, BPFI:8.4 Hz; Min operating temperature, Tmin:-40 °C; ra max:2.5 mm; B:80 mm; rs min:3 mm; Max operating temperature, Tmax:200 °C; Fatigue limit load, Cu:84.5 kN; d:110 mm; e:0.32; b:15.6 mm; |
C31/530M CARB Toroidal Roller Bearing 530*870*272mm | J:64 mm; A:25.5 mm; Weight:0.57 kg; N:12mm; A1:11 mm; Recommended tightening torque for set screw:5.5 Nm; Z:22.3 mm; A2:33.3 mm; C:12.8 kN; Designation of bearing:UC204G2L3; |
C 4032-2CS5V/GEM9 CARB Toroidal Roller Bearing 160x240x80mm | S:33 mm; A:90 mm; H1:35 mm; N:27mm; d:68.26 mm; L:360 mm; C0:68 kN; J:280 mm; Weight:13 kg; N1:40 mm; |
C3988M Bearing 440x600x118mm | Radial clearance class:C3; f0:14.1; Brand:NTN; Dynamic load, C:32.5 kN; D:85 mm; Characteristic rolling element frequency, BSF:4.92 Hz; B:19 mm; da min:51.5 mm; Fatigue limit load, Cu:0.93 kN; Characteristic cage frequency, FTF:0.4 Hz; |
C 39/560 M Bearing 560x750x140mm | Characteristic rolling element frequency, BSF:4.14 Hz; Da max:65.5 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; Mass:0.36 kg; da min:36.5 mm; Radial clearance class:C4; d:30 mm; Max operating temperature, Tmax:180 °C; Fatigue limit load, Cu:0.68 kN; f0:13.3; |
C30/630KM CARB Toroidal Roller Bearing 630*920*212mm | Fatigue limit load, Cu:0.16 kN; Da max:31 mm; Nlim (grease):19,000 rpm; rs min:0.6 mm; ra max:0.6 mm; Max operating temperature, Tmax:110 °C; B:11 mm; Characteristic cage frequency, FTF:0.37 Hz; Brand:NTN; da min:19 mm; |
C3996M CARB Toroidal Roller Bearing 480*650*128mm | Recommended tightening torque for set screw:3.7 Nm; C:9.55 kN; Weight:0.53 kg; A:25.5 mm; d:17.46 mm; B:19.1 mm; J:78 mm; N:12mm; Designation of housing:FC203-; d1:27.2 mm; |
C 3156K CARB Toroidal Roller Bearing 280x460x146mm | T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; T max.:100 °C; J:92 mm; Weight:1.68 kg; S:17.5 mm; Designation of open end cover:SCOU207-20; d:31.75 mm; A2:46.4 mm; A:36 mm; |
C3038K CARB Toroidal Roller Bearing 190x290x75mm | Self Aligning:Self Centering; Shaft Attachment (2):Set Screw; Retainer Material:Nylon; Flinger Type:Standard; Manufacturing Plant Location:Rogersville, TN; Housing Coating:No Coating; Bearing Insert Material:Nickel-Coated Steel; Base to Center Height:Not Applicable; Retainer Type:Std Retainer; Grease Type:Mobilth SHC 460; |
C3980M Bearing 400x540x106mm Video