| Chrome Steel Ball 5mm G10 | Characteristic cage frequency, FTF:0.38 Hz; Minimum Buy Quantity:N/A; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:3.77 Hz; Brand:NTN; Category:Bearings; Static load, C0:39 kN; Da max:45.5 mm; B:21 mm; Inventory:0.0; |
| 1.5mm Chrome Steel Ball AISI52100 Gcr15 | Max Bearing Speed:5000 rpm; Brand:Baldor-Dodge; Seal Type:Single Lip; Housing Material:Cast Iron; Bearing Locking Device:Setscrew; Base to Center Height:Not Applicable; Bearing Bore Shape:Round; Housing Type:2 Bolt Flange; Self Aligning:Self Centering; Bearing Outer Ring Material:Steel; |
| Chrome Steel Ball 3.5mm G10 | H:36.5 mm; C0:7.88 kN; H2:72 mm; d1:37.4 mm; T max.:100 °C; d:23.81 mm; B:34.8 mm; H1:12 mm; C:14 kN; Weight:0.75 kg; |
| 15.875mm Chrome Steel Balls G10 5/8 Inch | L:150 mm; d1:82 mm; Designation of bearing:ES212G2T20; C:52.5 kN; T min.:-20 °C; Dz:120 mm; T max.:200 °C; J:114 mm; Weight:3.86 kg; Designation of open end cover:SCOE212-60; |
| 21mm Chrome Steel Balls G10 | A:27 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:FL205N-; A1:13 mm; A2:35.7 mm; H:130 mm; C0:7.88 kN; B:34 mm; G:M6x1; Z:39.6 mm; |
| 11mm Chrome Steel Balls G10 | Designation of bearing:UC207G2T04; C0:15.2 kN; B:42.9 mm; G:M6x1; A3:2 mm; A5:25.4 mm; T max.:100 °C; d:35 mm; A:28 mm; C:25.7 kN; |
| 6.35mm Chrome Steel Ball AISI52100/SUJ-2 | L1:50 mm; C:14 kN; H:80 mm; T min.:-20 °C; S:7.5 mm; Designation of housing:PH205-; L:140 mm; N1:19 mm; d:22.22 mm; G:M6x1; |
| 2.0mm Chrome Steel Ball AISI52100/SUJ-2 | Characteristic inner ring frequency, BPFI:4.93 Hz; f0:13.2; Characteristic rolling element frequency, BSF:4.07 Hz; Characteristic outer ring frequency, BPF0:3.07 Hz; Fatigue limit load, Cu:0.11 kN; Characteristic cage frequency, FTF:0.38 Hz; D:30 mm; Static load, C0:2.39 kN; Mass:0.03 kg; B:9 mm; |
| 1/16 Inch Diameter Chrome Steel Ball Bearing G10 Ball Bearings | J:78 mm; Designation of housing:FCE203-; d1:27.2 mm; B1:28.6 mm; L:100 mm; s1:23 mm; d:12 mm; e:2 mm; A1:8 mm; H3:62; |
| 6.5mm Chrome Steel Balls G10 | S:19 mm; Dz:95 mm; Weight:2.36 kg; C:31.85 kN; G:R1/8"; Recommended tightening torque for set screw:8 Nm; e:24 mm; C0:20.8 kN; A2:54.2 mm; Designation of housing:FE209N-; |