| Chrome Steel Ball 4.5mm G10 | Ball Bearing Housing Series:207 Series; Ship Weight:3.8 LB; Manufacturing Plant Location:Rogersville, TN; Bearing Locking Device:Setscrew; Flinger Type:Standard; Housing Material:Cast Iron; Shaft Attachment (2):Set Screw; Bearing Outer Ring Material:Steel; Anti-Rotation Pin:Yes; Bearing Duty:Normal Duty; |
| 15.875mm Chrome Steel Balls G10 5/8 Inch | L:150 mm; d1:82 mm; Designation of bearing:ES212G2T20; C:52.5 kN; T min.:-20 °C; Dz:120 mm; T max.:200 °C; J:114 mm; Weight:3.86 kg; Designation of open end cover:SCOE212-60; |
| 16.6688mm Chrome Steel Balls G10 | Cage Material:Brass; Fatigue limit load, Cu:11.6 kN; overall width:24 mm; Mass (without HJ ring):1.21 kg; Product Group:B04144; Category:Cylindrical Roller B; manufacturer product page:Click here; Da max:117 mm; Max operating temperature, Tmax:120 °C; |
| 9.525mm Chrome Steel Balls AISI52100 G10 | T min.:-40 °C; A1:13 mm; A:40 mm; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; G:R1/8"; S:10.2 mm; Weight:2.32 kg; e:24 mm; d:42.86 mm; |
| 4mm Chrome Steel Balls G10 | e:0.24; Precision class:P0; rs min:2 mm; d:50 mm; Nref:6,300 rpm; Characteristic outer ring frequency, BPF0:6.26 Hz; Ce min:5 mm; Nlim:8,300 rpm; Characteristic inner ring frequency, BPFI:8.74 Hz; d1:71.2 mm; |
| Chrome Steel Ball 3.5mm G10 | H:36.5 mm; C0:7.88 kN; H2:72 mm; d1:37.4 mm; T max.:100 °C; d:23.81 mm; B:34.8 mm; H1:12 mm; C:14 kN; Weight:0.75 kg; |
| 2.5mm Chrome Steel 52100 | Bearing Insert Material:Steel; Retainer Material:Nylon; Flinger Material:Steel; Bearing Inner Ring Material:Steel; Grease Type:Unirex N2; Base to Center Height:Standard; End Cap Groove:No; Ball Material:Steel; UPC:782475324378; Bearing Duty:Normal Duty; |
| 3/16 Chrome Steel Ball AISI52100/SUJ-2 | Designation of bearing:UC202-10G2; C:12.8 kN; T min.:-20 °C; A:25.5 mm; L:60 mm; B:31 mm; S:12.7 mm; s1:15.5 mm; Designation of housing:FA204-; J:78 mm; |
| Chrome Steel Ball 4.0mm G10 | Designation of housing:P217-; G:M10x1; H2:187 mm; L:310 mm; A1:53 mm; d1:110 mm; H1:32 mm; H:95.2 mm; s1:40 mm; L1:96 mm; |
| 12.7mm Chrome Steel Ball G5/G10/G25/G50/G100/G1000 | Recommended tightening torque for set screw:8 Nm; G:M6x1; d1:51.1 mm; B1:51.1 mm; d:34.92 mm; E:22 mm; L:100 mm; T max.:100 °C; L1:35 mm; T min.:-20 °C; |